517061
21
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
16 02R Applications
Yamaha 02R & 03D Applications Guide
3
02R with Two ADATs & JL Cooper Datasync-2
This application shows how the 02R can be used with two Alesis ADATs and JL Cooper
Datasync-2 Synchronizer to create a 24-input, 16-track digital recording system. The JL
Cooper Datasync-2 Synchronizer is a cost-effective device for setting up a synchronized 02R
and ADAT system.
The 16 digital tape returns and 24 Mic/Line inputs provide up to 40 inputs at mixdown. In
addition, the 02R’s built-in automation and scene memory systems provide both dynamic
and static mix automation referenced to MIDI timecode.
Connections
The ADAT (CD8-AT) cards must be screwed securely in place. Do not leave the screws
out after installation as the cards will not be grounded correctly.
The Digital In/Out connectors on the 02R and ADAT are connected together using
Optical Cables. Press the DIGITAL IN buttons on the ADATs to use the DIGITAL INs.
ADAT–A is connected to Slot [1] of the 02R and the tape inputs correspond to tracks
one through eight.
ADAT–B is connected to Slot [2] of the 02R and the tape inputs correspond to tracks
nine through sixteen.
The JL Cooper Datasync-2 Synchronizer converts the ADAT’s internal timecode to MIDI
timecode or SMPTE timecode.
9-pin Sync cables for connecting the ADATs and Datasync-2 are available from Alesis.
02R Wordclock Setup
ADAT (CD8-AT) cards are installed in Slot [1]and Slot [2], so any pair of the tape inputs
can be selected as the wordclock source on the DIGITAL I/O menu.
ADAT Wordclock Setup
ADAT–A should be set as wordclock master. To confirm this, press the SET LOCATE and
DIGITAL IN buttons together. The display should show “int”, meaning internal wordclock.
The ADAT sampling rate can be set to either 48 kHz or 44.1 kHz. Use Fixed mode for
48 kHz and Variable mode for 44.1 kHz (using the PITCH DOWN button, set to –147 cents.
At which point “–146, 44.1, –148” appears on the display). The newer ADAT-XT has
dedicated switches for selecting these two sampling rates.
Notes
Press the DIGITAL IN buttons on the ADATs to use the DIGITAL INPUTs.
ADAT–B must be powered up before ADAT–A, because when ADAT–A is powered up it
checks how many ADATs are connected, allocates them device numbers, and
automatically sets the system word clock. ADAT–A works as Control Master.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha 03D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha 03D

Yamaha 03D Bedienungsanleitung - Deutsch - 307 seiten

Yamaha 03D Bedienungsanleitung - Holländisch - 302 seiten

Yamaha 03D Bedienungsanleitung - Französisch - 300 seiten

Yamaha 03D Bedienungsanleitung - Italienisch - 301 seiten

Yamaha 03D Bedienungsanleitung - Portugiesisch - 141 seiten

Yamaha 03D Bedienungsanleitung - Spanisch - 315 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info