517061
81
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
76 03D Applications
Yamaha 02R & 03D Applications Guide
29
03D with Pro Tools
This application shows how the 03D can be used with a Pro Tools system. The eight digital
tape returns and 18 Mic/Line inputs provide up to 26 inputs at mixdown. In addition, the
03D’s built-in automix and scene memory systems provide both dynamic and static mix
automation referenced to MIDI timecode.
A Digidesign 888 I/O Audio Interface connects the 03D to the Pro Tools system, with a
special 50-pin Pro Tools cable between the computer card and 888. The 25-pin connector
on the CD8-AE-S card connects to a patchbox, which provides eight AES/EBU inputs (four
XLRs) and eight AES/EBU outputs (four XLRs).
Pro Tools can be controlled remotely from the 03D using the Pro Tools template of the MIDI
Remote function. The 03Ds built-in automix is referenced to MTC coming from the Pro
Tools system. A MOTU MIDI Timepiece (or Opcode Studio 4) is used as a MIDI interface
and connects to the computer’s Modem port.
Connections
The AES/EBU (CD8-AE-S) card must be screwed securely in place. Do not leave the
screws out after installation as the card will not be grounded correctly.
YGDAI digital outputs can be configured as bus outs, aux sends, input channel direct
outs, or stereo outs. So although the 03D is a four-bus mixer, assigning the four buses
and four aux sends, or the channel direct outs, to the YGDAI outputs allows eight-track
simultaneous recording. YGDAI output assignments are made on the D.out Setup page,
which can be located using the [DIO] button.
YGDAI digital inputs feed 03D input channels 17 through 24.
The Digital In/Out connectors on the 03D and patchbox are connected together using a
25-pin D-sub cable.
The patchbox is connected to the 888 I/O Audio Interface using AES/EBU-compatible
XLR cables.
The 888 I/O Audio Interface connects to the audio card using a special 50-pin Pro Tools
cable.
03D Wordclock Setup
The 03D works as a wordclock slave and receives its wordclock from the Pro Tools system.
Use the [DIO] button to locate the D.in Setup page and select SLOT 1/2 (i.e., AES/EBU 1/2).
Pro Tools Wordclock Setup
The Pro Tools system should be configured as wordclock master.
Note
The XLR<–>D-sub box (or D-sub to XLR break-out cable) is not available from
Yamaha, and should be custom made.
81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha 03D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha 03D

Yamaha 03D Bedienungsanleitung - Deutsch - 307 seiten

Yamaha 03D Bedienungsanleitung - Holländisch - 302 seiten

Yamaha 03D Bedienungsanleitung - Französisch - 300 seiten

Yamaha 03D Bedienungsanleitung - Italienisch - 301 seiten

Yamaha 03D Bedienungsanleitung - Portugiesisch - 141 seiten

Yamaha 03D Bedienungsanleitung - Spanisch - 315 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info