Bedienungsanleitung Yamaha AN1X (Seite 16 von 122) (Englisch)

48724

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

RIBBON Controller

The [RIBBON] controller lets you control two different

assignable parameters as you play. You can control

one parameter by sliding your finger along the X-axis,

and another by applying pressure to the Z-axis. You

can assign parameters to the [RIBBON] controller using

the Utility Assign Control function (see page 50) or the

Control Matrix (see page 51).

You can assign different parameters to the [RIBBON] controller for each voice. For

information, see page 75.

To activate the Z-axis you must apply considerable pressure. A light touch will only

apply to the X-axis.

When you release your finger from the [RIBBON] controller, the value may remain

at the same position as at the time of release, or reset to the center position

depending on the Control Matrix setting. (See page 73.)

CONTROL Knobs And

Parameter Groups

Which parameter is edited by each CONTROL knob for

each Scene depends on which KNOB PARAMETER

GROUP switch is currently selected, indicated by a lit LED

to the left of it. Pressing a CONTROL knob (push-switch) or

turning a knob will cause its parameter name and value to

display in the LCD.

When you select a voice the [ASSIGN] switch will

automatically be selected (unless the [EDIT ROTARY] switch

is set to SEQ EDIT/SETUP), which lets you access the eight

parameters assigned to the respective CONTROL knobs.

For more information about the Utility Control Assign function, see pages 50, 95.

KNOB PARAMETER GROUP

PEG/LFOSYNC/FM

VCO1

VCO2

MIX/VCF

VCF

VCA

ASSIGN

ASSIGN 4

Sync Pitch

Src

Edge

Port Time

Edge

Release

Noise

Level

Selected parameter group

Selected CONTROL knob parameter

X-axis

Minimum

Maximum

Z-axis

Apply pressure

When you set the [EDIT ROTARY] switch to the 5th position

(SEQ EDIT/SETUP menu), the CONTROL knobs will be

dedicated to the event parameters of the various steps

(beats) of the Step Sequencer.

In this situation, no LED will be lit in the KNOB

PARAMETER GROUP section, and the name of the current

step event parameters will appear in the LCD when you

turn or press a knob.

Simply pressing a KNOB PARAMETER GROUP switch will

revert the status back to normal tone generator parameter

control, as will selecting a different Edit menu with the

[EDIT ROTARY] switch. As long as the [EDIT ROTARY]

switch is still set to the SEQ EDIT/SETUP menu, however,

you can press the selected KNOB PARAMETER GROUP

switch again to revert to Step Sequencer control by the

knobs (i.e., you can toggle back and forth between knob

parameter control and step event data edit by pressing the

switch.)

For more information about the KNOB PARAMETER GROUP switches, see page 16.

For more information about the CONTROL knobs, see page 16. For information

about the Step Sequencer, see page 37.

Foot Controllers

The AN1x features [FOOT CONTROLLER], [FOOT VOLUME],

and [FOOTSWITCH] jacks for connecting various foot

pedals, each of which can be assigned to control one of

many types of available on-board and external parameters.

For more information about assigning controllers, see page 49.

Layer Modes And Portamento

One of six Layer modes can be assigned to each voice by

pressing the [LAYER] switch, and Portamento on/off status

can be set by pressing the [PORTAMENTO] switch.

For more information about Layer modes, see page 22. For more information

about portamento, see page 24.

DEMO

PORTAMENTO

STORE

ARPEGGIO/SEQ

LAYER

KNOB PARAMETER GROUP

PEG/LFOSYNC/FM

VCO1

VCO2

MIX/VCF

VCF

VCA

ASSIGN

ASSIGN 4

Sync Pitch

Src

Edge

Port Time

Edge

Release

Noise

Level

Knob

Event

1-8/9-16

SEQ

EDIT /SETUPStep Hold

Pattern

Bank

BaseUnit

Length LoopType Ctrl No

SEQ

Store

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AN1X Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AN1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info