Bedienungsanleitung Yamaha AN1X (Seite 18 von 122) (Englisch)

48724

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

4 Turn the CONTROL knobs.

● Press a KNOB PARAMETER GROUP switch and turn

each CONTROL knob as you play each Scene to

hear how it affects the sound. There are eight

different groups of parameters assigned to the

knobs at the factory. These let you edit the tone

generator parameters as printed on the panel

beside each knob. Notice how easy it is to edit

and drastically change the voice.

For more information about using the CONTROL knobs, see page 26.

5 Compare Layer modes.

● Press the [LAYER] switch to compare the difference

of each of the six Layer modes as you play, one at

a time.

For more information about Layer modes, see page 22.

6 Change Poly mode setting.

● To hear how the keyboard Poly setting affects how

the voice can be played, set the [EDIT ROTARY]

switch to the VOICE SCENE SETUP menu and press

the Poly [UP/DOWN] switch to select POLY,

MONO or LEGATO. Then play the keyboard.

For more information about Poly mode, see page 72.

7 Turn [ARPEGGIO/SEQ] on and off.

● If the voice uses the Arpeggiator (“ARP” appears in

the LCD) or Sequencer (“SEQ” appears in the LCD),

press the [ARPEGGIO/SEQ] switch to turn it off

and hear how the voice sounds without the pattern.

● Pay attention to how the arpeggio or sequence is

triggered—either across the entire length of the

keyboard, or only to the left of the Split Point. In the

case of the Step Sequencer, some voices are

programmed to let you trigger a different pattern

from each key to the left of the Split Point.

● Set the [EDIT ROTARY] switch to the VOICE

ARPEGGIO/SEQ menu and press KbdMode

[UP/DOWN] once to confirm the setting which

determines how the pattern is triggered. Next, set

the [EDIT ROTARY] switch to the VOICE SCENE

SETUP menu and press Poly [UP/DOWN] and

compare the way the different Poly mode settings

affect the pattern as you play the keyboard.

● If the voice does not use the Arpeggiator or Step

Sequencer, press [ARPEGGIO/SEQ] to turn on the

Arpeggiator or Step Sequencer and hear how notes

and chords are affected.

For more information about the Arpeggiator, see page 33. For information about

the Step Sequencer, see page 37.

8 Change arpeggio Tempo, Pattern Type,

Subdivision, and Hold status.

● To speed up or slow down the Arpeggiator pattern

(or sequence), set the [EDIT ROTARY] switch to the

VOICE COMMON menu and press Tempo

[UP/DOWN] until you achieve the desired rate.

For more information about Tempo, see page 77.

● To try out the 30 different preset Arpeggiator

pattern types, set the [EDIT ROTARY] switch to the

VOICE ARPEGGIO/SEQ menu and press the

Type/No [UP/DOWN] switch and step through

each pattern.

For more information about the Type/No parameter, see page 34.

● To hear how the timing resolution of a pattern

changes with the 10 different Subdivide settings, set

the [EDIT ROTARY] switch to the VOICE

ARPEGGIO/SEQ menu and press Arpeggio

Subdivide [UP/DOWN] to step through each.

For more information about Arpeggio Subdivide, see page 34.

9 Change Effects and adjust EQ.

● To hear the different Variation and EQ effects and

settings, set the [EDIT ROTARY] switch to the VOICE

COMMON menu and press Vari EF/EQ Param

[UP/DOWN] and Data [UP/DOWN] switches

accordingly. Also press the Vari EF Dry:Wet

[UP/DOWN] to change the balance between “dry”

(normal) and “wet” (effected) signals.

For more information about Vari EF/EQ, see page 77.

● To hear the different Delay and Reverb effects and

settings, press Dly/Rev EF Param [UP/DOWN] and

Data [UP/DOWN] switches accordingly.

For more information about Dly/Rev EF mode, see page 79.

● To bypass specific or all effects and hear how the

voice sounds in its pristine state, press EF Bypass

[UP/DOWN] and change the status accordingly.

EF Bypass is a system parameter, and therefore will remain as you set it

regardless of which voice is selected. For more information, see page 80.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AN1X Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AN1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info