Bedienungsanleitung Yamaha AN1X (Seite 82 von 122) (Englisch)

48724

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

When set to “bar”, the Free EG record and play time is determined by the Tempo

setting in the VOICE COMMON menu. This synchronizes the Free EG movement

with the Arpeggiator or Step Sequencer.

● Key Track

The Key Track setting determines the length of the Free

EG in relation to notes played on the keyboard, using

C3 as the basic note length. When set to “0”, the

length will be the same for all notes across the entire

keyboard. Negative values will cause the Free EG

length to decrease when you play in the lower register,

and positive values will cause the Free EG length to

decrease when you play in the higher register.

Settings: -64 ~ +63

Track

Track settings determine the current Free EG track, the

parameter assigned to each track, and which Scene

the Free EG will play. There are three Track

parameters, including Track No (Number), Param

(Parameter) and SceneSw (Switch).

When you start recording the Free EG, the parameter of the first knob you move,

along with the current Scene setting, will be assigned to the track Parameter (i.e.,

that parameter will be recorded in the track). This is convenient for initiating a

Free EG recording immediately, without making all settings beforehand.

Track Confirm and Assignment Procedure

1. Using Track No [UP/DOWN], set the track you

want to record or play.

2. Using Param [UP/DOWN], select the parameter

which you want to record in the track.

3. Using SceneSw [UP/DOWN], set the Scene

(Scene 1, Scene 2, or both Scenes) which you

want the Free EG to affect.

4. If necessary, repeat steps 1 through 3, above,

for selecting other tracks and assigning

parameters to them.

You cannot assign the same parameter to more than one track. If you attempt

to do so, the latest recorded track takes priority, while other tracks will

automatically be turned off for the Scene Switch.

Triggering The Free EG With Patterns

The Free EG can be used in conjunction with the Arpeggiator

or Step Sequencer. When the Trigger is set to “kbd”, the Free

EG will be applied to the pattern.

Each time you press a key the Free EG will be retriggered.

When the Trigger is set to “all”, the Free EG will be

retriggered whenever the Arpeggiator or Step Sequencer is

played.

● Loop Type

The Loop Type setting determines the type of loop for

play of the Free EG sequence.

Settings:

off: The Free EG sequence plays once but does not loop. The

parameter settings at the end of the Free EG sequence remain

in effect.

fwd: The Free EG sequence loops from start to end.

half: The Free EG sequence loops from the middle to the

end.

alt (Alternate): The Free EG sequence loops from start to

end, then end to start.

half (Half Alternate): The Free EG sequence loops from

middle to end, then end to middle.

● Length

The Length setting determines the time for recording

and play of the Free EG sequence. There are two

Length types, including length determined by number of

measures or by absolute time (seconds).

Settings:

bar (number of measures): 1/2, 1, 3/2, 2, 3, 4, 6, 8

s (seconds): 1.0 ~ 16.0

Motif

Hold = “on”

Key On Key Off Key On

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AN1X Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AN1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info