Bedienungsanleitung Yamaha AN1X (Seite 84 von 122) (Englisch)

48724

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Copy Procedure

1. Press Track No [UP/DOWN] to select the track to

which you want to copy Free EG data to

(destination).

2. Press Copy [UP/DOWN] to select the track from

which you want to copy Free EG data (source).

The Copy operation is completed.

When the “Cpy fm” (Copy from) page is displayed in the

LCD, you can press Copy [UP/DOWN] to select a track from

either the current voice or from another voice. As you select a

track, you can play the keyboard to hear how the new Free

EG data affects the voice.

When the new track number is selected (step 2), the copy

operation is completed.

There is no specific copy confirmation function, but you can retrieve the

original track Free EG data using the Undo function.

Remember that Free EG data consists of knob movement data and not actual

parameter values. This means that the parameter controlled can be anything

you set for the Track Number using the Param setting.

● Undo

The Undo function lets you “undo” as well as “redo”

the most previous Free EG copy or record operation.

After a copy or record operation, simply press Undo

(/Redo) [UP/DOWN] to toggle back and forth

between the new data and the original data.

Free EG Recording Procedure

1. Press the Rec [UP/DOWN] switch and enter

Record Standby (Track or All) mode.

In Record Standby mode, Length and Track Number parameters are available,

but others cannot be accessed. (Also, MIDI control will be ineffective.)

In Record Standby mode or during recording, you can stop the record operation

by turning the [EDIT ROTARY] switch, and return to the REC OFF status.

If you want to record in the selected track, choose REC STBY Trk. If you want

to record in all four tracks, choose REC STBY All.

2. Change the Free EG Length (see page 82), or

select a Track Number for the selected

Parameter (see page 83).

When the Length parameter is set to "bar", the length is

determined by the Tempo setting, and a click will sound (in

quarter-note beats) to use as a timing guide.

3. When you press a key on the keyboard,

recording will begin, so you can start moving

the knob (or knobs) as desired.

Recording time is visually displayed by the horizontal data graph in the LCD.

When the KNOB PARAMETER GROUP [ASSIGN] switch is selected, knob

movements will not be recorded in the track.

In step 1, above, if REC STBY Trk is selected, the knob most

recently moved is already designated as available for

recording. If REC STBY All is selected, the four most recently

moved knobs are already designated as available for

recording.

When you start recording the Free EG, the currently selected Scene will be

automatically assigned to the Scene Switch (for the selected track), and the

parameter of the first knob you move will be assigned to track Parameter (i.e.,

that parameter will be recorded in the track). This is convenient for initiating a

Free EG recording immediately, without making all settings beforehand.

When Scene Control is activated, setting the Free EG to Record Standby mode

automatically selects Scene 1.

4. Recording automatically stops when the end of

the set Length is reached.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AN1X Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha AN1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info