Bedienungsanleitung Yamaha AVXS100 (Seite 30 von 82) (Englisch)

19270

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

BASIC PLAYBACK

■ Selecting PRO LOGIC II

You can enjoy the 2-channel sources decoded into five

discrete channels by selecting PRO LOGIC II in program

No. 9.

(While playing a 2-channel source)

1 Press AMP.

2 Press q/DTS.

The previously selected sub program appears on the

front panel display.

3 Press SELECT repeatedly to select the

decoder, PRO LOGIC II.

4 After selecting on the decoder (PRO LOGIC

II), select the mode appropriate for the

source by pressing q/DTS.

The selection switches as follows;

PRO LOGIC II Movie ↔ PRO LOGIC II Music

• You can select PRO LOGIC, PRO LOGIC II Movie, and PRO

LOGIC II Music by pressing DSP H/G on the front panel

repeatedly.

Note

• Playback using DOLBY PRO LOGIC II decoders is possible

only for 2-channel signals.

■ Playing Dolby Digital Surround

EX or DTS ES software

Press MATRIX 6.1 to turn on the Dolby Digital + Matrix

6.1 or DTS + Matrix 6.1 decoder.

The rear center channel is created from rear left and right

channels, and output from virtual rear center speaker.

The display changes AUTO ^ Matrix6.1 ^ OFF each

time the MATRIX 6.1 button is pressed.

• AUTO: This mode automatically switches Dolby

Digital + Matrix 6.1 and DTS + Matrix 6.1

depending on the signal. Virtual rear center

speaker does not work for 5.1 channel

sources.

• Matrix6.1: This setting produces 6-channel playback

of the input source using the Matrix 6.1

decoder. The virtual rear center speaker can

be used when playing a 5.1-channel source.

• OFF: Virtual rear center speaker does not work in

this setting.

• When the Matrix 6.1 decoder is functioning, the “MATRIX”

indicator lights up on the front panel display.

Notes

• Some Dolby Digital Surround EX or DTS ES software may not

contain the signal that is necessary for this unit to switch to the

Matrix 6.1 decoding mode. To turn on the Matrix 6.1 decoder

when playing such a source, select “Matrix6.1”.

• Playing a 6.1-channel source is not possible even if

MATRIX6.1 is pressed in the following cases:

– when “1C REAR LR” in the SET MENU is set to NON;

– when the sound effect is turned off;

– when headphones are connected;

– when a Dolby Digital KARAOKE source is being played;

– when 5ch Stereo is selected.

• The setting becomes AUTO once this unit turns into standby

mode.

■ Virtual CINEMA DSP

With Virtual CINEMA DSP, you can enjoy all DSP

programs without rear speakers. It creates virtual speakers

to reproduce a natural sound field.

You can listen to virtual CINEMA DSP by setting “1C

REAR LR” in the SET MENU to NON. Sound field

processing changes to VIRTUAL CINEMA DSP

automatically.

• When virtual CINEMA DSP is functioning, the “VIRTUAL”

indicator lights up on the front panel display.

Note

• This unit is not set in the virtual CINEMA DSP mode even if

“1C REAR LR” is set to NON in the following cases:

– when the 5ch Stereo, DOLBY DIGITAL Normal, Pro Logic

Normal, Pro Logic II, or DTS Normal program is selected;

– when the sound effect is turned off;

– when 96-kHz sampling digital signals are input to this unit;

– when using the test tone; or

– when connecting the headphones.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AVXS100 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info