Bedienungsanleitung Yamaha AVXS100 (Seite 31 von 82) (Englisch)

19270

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

BASIC PLAYBACK

English

USING BASIC FUNCTIONS

■ SILENT CINEMA DSP

You can enjoy a powerful sound field similar to what you

could expert from actual speakers with SILENT

CINEMA DSP. You can listen to SILENT CINEMA DSP

by connecting your headphones to the

SILENT jack

while the digital sound field processor is on. Enjoy all the

DSP program using the headphones. The “SILENT”

indicator lights up on the front panel display. (When

sound effects are off, you listen to the source with normal

stereo reproduction.)

• When SILENT CINEMA DSP is functioning, the “SILENT”

indicator lights up on the front panel display.

Notes

• This feature is not available when 96-kHz sampling digital

signals are input to this unit.

• The sound of LFE channel will be mixed and output from the

headphone.

■ Normal Stereo Reproduction

Press STEREO to turn off the sound effect for normal

stereo reproduction.

Press STEREO again to turn the sound effect back on.

Notes

• If you turn off the sound effects, no sound is output from the

center or rear speakers.

• The volume may be greatly reduced when you turn off the

sound effects or if you set “4 D. RANGE” on the SET MENU

to MIN. In this case turn on the sound effect.

• The sound of LFE channel will be directed to the front left and

right or the subwoofer (or both) channels depending on the

setting of “1D BASS” on the SET MENU.

• If you turn off the sound effects while a Dolby Digital or DTS

signal is being output, the dynamic range of the signal is

automatically compressed and the sounds of the center and rear

speaker channels are mixed and output from the front speakers.

■ Displaying the information about

input signal

During stereo reproduction, you can display information

such as the type, format and sampling frequency of the

signal input from the components connected to this unit.

(While playing a stereo source)

1 Press AMP.

2 Press d to display the information about the

input signal.

• Format:

The type of an input signal. When digital input is not known,

the mode is set to the analog mode.

• fs:

The sampling frequency of an input signal when a digital signal

is input. If the frequency is not known, “unknown” appears on

the front panel display.

• Audio Channels:

The number of audio channels included in an input signal when

a Dolby Digital or DTS signal is input.

• Rate (bit rate):

The amount of data contained in an input signal per second

when a Dolby Digital or DTS signal is input. If the bit rate is

not known, “unknown” appears on the front panel display.

• Flg (flag):

An identification signal contained in an input signal when a

Dolby Digital or DTS signal is input. If the flag is not detected,

“None” appears on the front panel display.

■ Notes on 96-kHz sampling digital

signals

The digital input jacks of this unit can handle 96-kHz

sampling digital signals. Note the following when 96-kHz

sampling digital signal is input to this unit:

– DSP programs cannot be selected.

– Sound will be output as 2-channel stereo from only the

front left and right speakers. (There may be sound

output from the subwoofer depending on the

SPEAKER MODE settings on the SET MENU.)

Therefore, the level of the effect speakers cannot be

adjusted while listening to such a source.

Input signal

Analog signal

PCM signal

Dolby Digital signal

DTS signal

Other digital signals

Display

Analog

PCM

Dolby Digital

DTS

Unknwn Digital

(Unknown Digital)

105_S100_21-28_EN 02.5.13, 1:30 PM27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha AVXS100 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info