Bedienungsanleitung Yamaha CBX-K1 (Seite 16 von 31) (Englisch)

586874

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Using the SHIFT-Related Functions

The enormous flexibility and power of the CBX-K1 is in its

“hidden” or SHIFT-related functions — allowing you to

send virtually any kind of MIDI message directly from the

keyboard or use the ASSIGNABLE Wheel for real-time

control change.

Many of the functions can be done with one or two key-

strokes, while others require you to enter a number value

and press one of the L keys to execute the function.

All functions can be accessed or executed by using one of

the operations described below.

Holding C, pressing the function’s key and then

L. These functions are indicated with a dashed

underline on the panel (for example, GM ON and XG

ON) and require pressing L to execute.

Holding C, pressing the function’s key, entering

a value and then pressing L. These functions

are indicated with an underline on the panel (for ex-

ample, PROGRAM CHANGE and TEMPO), and

require that a value (Decimal or Hexadecimal) be

entered.

● In using the SHIFT-related functions, re-

member:

Keep holding down C until the end of the

operation. If C is released in mid-operation,

you’ll have to start the operation all over again.

In the instructions that follow, “L” refers to either of

the ENTER keys, J or K.

In other words, this means that either key can be used,

unless indicated otherwise.

NOTE

■

The

lamps flash briefly

when a function is executed or a message is sent.

The MIDI functions can be generally divided into three

types, according to their operation.

Holding C and pressing the function’s key. For

these functions, such as Sequencer Stop and Start,

pressing L is not necessary. These functions are

shown on the panel without underline.

Using the CBX-K1 — Basic Operations

MIDI functions

(Group A and

Group B)

Value entry

(Decimal and

Hexadecimal)

STOP CONTINUE START

SOUND

OFF

MERGE

ON/OFF 1 2 3 4 5 6 7 8 9 A B C D E F 0

TRANSPOSE

HEXA

DECIMAL

OCTAVE

OCTAVE SHIFT

OCTAVE

RESET

ENTER

DRUM

NUMBER

NRPN

CONTROLLER

RPN

FIXED

VELOCITY

MIDI

PROGRAM

CHANGE

BANK

SELECT

TEMPO

PROGRAM RESET SYSTEM WHEEL ASSIGNSEQUENCER

SHIFT

GM

XG

keys

Panel Name Group A Function Group B Function

STOP Stop Song Select

CONTINUE Continue Song Position Pointer

START Start Reset All Controllers

TEMPO Tempo —

BANK SELECT Bank Select —

PROGRAM CHANGE Program Change —

GM ON GM On —

SOUND OFF All Sound Off (each channel) All Sound Off (all channels)

XG ON XG On GM-B Reset

MERGE ON/OFF Merge On/Off (each channel) —

MIDI CH MIDI Channel Merge On/Off (each channel)

FIXED VELOCITY Fixed Velocity Touch Sensitivity

RPN Wheel Assign (RPN)

Controller Direct Data Send

(RPN)

CONTROLLER Wheel Assign

(controller number on panel)

Controller Direct Data Send

(controller number on panel)

NRPN Wheel Assign (NRPN)

Controller Direct Data Send

(NRPN)

DRUM NUMBER Drum Number Device Number

TRANSPOSE Q Transpose Down Wheel Invert

TRANSPOSE W Transpose Up MSB/LSB Invert

● Functions Assigned to the Keyboard

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CBX-K1 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CBX-K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info