Bedienungsanleitung Yamaha CBX-K1 (Seite 19 von 31) (Englisch)

586874

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Setting a Specific Value for a Function

(MSB, LSB)

Operation: C + Function Key → MSB value → LSB value

→ L

Relevant Functions: Bank Select; RPN; NRPN

● Example: Selecting a Bank of Voices on a Tone Generator

Some tone generators feature two or more banks of voices. This

example shows how to use the Bank Select function to select

different banks. This example also shows you how to use the

functions that require entry of two values: MSB and LSB.

In this example, we’ll enter a value of 012 (MSB) 034 (LSB)

C + T → 0 → 1 → 2 → 0 → 3

→ 4 → K

NOTE

■

Decimal values of MSB and LSB are 3 digits

each (6 digits total); hexadecimal values are 2 digits

each. Zeroes must be entered, unless they occur at the

beginning of the value. For example, for the decimal

value of 001 (MSB) 012 (LSB), the first two zeroes may

be omitted, but the third must be entered. In other

words, the value could be entered as

→

Transpose Setting

Operation: C + G / H

To transpose up one semitone, use the H key

(F3). To transpose down one semitone, use the

G key (E3). Each repeated pressing of the

key while holding C transposes the pitch by an

additional semitone. To restore the normal default trans-

pose setting, hold down C and press both

G / H keys simultaneously.

NOTE

■

You can also enter transpose values directly by

using operation 4 above.

Setting a Specific Value for a Specific

Controller

Operation: C + Function Key → Controller Number →

L → Value(s) → L

Relevant Functions: RPN*; Controller; NRPN*

Functions marked with an asterisk (*) above require that

you enter two values: an MSB (Most Significant Byte)

and an LSB (Least Significant Byte).

● Example: Changing the Portamento Time of a tone generator’s voice

C + S → 5 (Portamento Time) → L →

{2 → 5 → L}

The operation steps enclosed in brackets ({}) can be

repeated or re-entered as long as C is held.

NOTE

■

This operation assigns a controller number for

the ASSIGNABLE Wheel and sends a specific value for

that controller number. You can also send a specific

value for the controller (in the Group B functions)

without altering the controller assignment.

Selecting a Drum Number (when editing

a specific drum number with controller

numbers 131 - 141)

You can use operation 4 above to set the drum number

for editing a specific drum number with controller numbers

131 - 141. However, the following operation lets you set

the Drum number by playing it from the keyboard. This

allows you to hear the drum sound you’ll be editing, since

the last note played on the keyboard determines the drum

sound to be changed.

Without pressing C, find the desired drum number by

sound — by pressing keys on the keyboard. Next, hold

down C, press F, then L. This

sets the drum number to the last key pressed. Then (to set

the controller number for that drum sound), hold down

C and press S, then enter the controller

number (131 through 141). This sets the Controller Num-

ber for the Drum parameter you wish to control with the

ASSIGNABLE Wheel.

Using the CBX-K1 — Basic Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CBX-K1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CBX-K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info