Bedienungsanleitung Yamaha CBX-K1 (Seite 23 von 31) (Englisch)

586874

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Group A Functions

● Footnotes

*1 For toggle (on/off) switch functions, the V /

B lamps blink rapidly when the function is set

to ON, and flash once when it is set to OFF.

*2 To send a specific value for the current control number

assignment of the Wheel, hold down C, enter the

desired value, and press L. However, this cannot

be done with controller numbers 143 (Polyphonic Key

Pressure), 147 (Velocity), or 148 (Tempo).

*3 Transpose can be done in two ways: by repeatedly

pressing the appropriate TRANSPOSE key or by

entering the transpose value directly after pressing the

appropriate TRANSPOSE key. To restore the normal

transpose setting, hold C and press both

G / H keys simultaneously.

— — <<FC>>

— — <<FB>>

— — <<FA>>

0, 20-300 (0, 14-12C) 120 <<F8>>

(0: MIDI clock off)

MSB: 000-127 (00-7F) —

<<Bn 00 msb, Bn 20 lsb, Cn pp>>

LSB: 000-127 (00-7F)

0-127 (0-7F) 0 <<Cn pp>>

— — <<F0 7E 7F 09 01 F7>>

— — <<Bn 78 00>>

——

<<F0 43 ls 4C 00 00 7E 00 F7>>

ON, OFF ON —

1-16 (1-10) 1 —

0, 1-127 (0, 1-7F) 0 —

MSB: 000-127 (00-7F) —

<<Bn 64 lsb, Bn 65 msb, Bn 06 vv>>

LSB: 000-127 (00-7F)

0-148 (0-94) 1 <<Bn gg vv>>

MSB: 000-127 (00-7F) —

<<Bn 62 lsb, Bn 63 msb, Bn 06 vv>>

LSB: 000-127 (00-7F)

0-127 (00-7F) 0 —

0-12 (0-C) 0 —

Explanation Range (Hexadecimal Default MIDI Code

in parentheses) Setting

Stop command for sequencer/rhythm machine.

Continue command for sequencer/rhythm machine.

Start command for sequencer/rhythm machine.

Tempo entry for sequencer/rhythm machine. Setting this to 0 disables the MIDI clock transmission.

When ASSIGNABLE Wheel is set to Tempo (cntrl. no. 148), this is inactive.

This allows selection of voice banks on tone generators that support multiple banks. The bank select

message must include both MSB and LSB values.

This allows entry of program numbers. Stepping up or down through program numbers is also possible

by holding down C and using the N / M buttons; see page 10.

This resets the connected tone generator to General MIDI operation. WARNING: Be careful when using

this, since it automatically changes whatever settings you’ve made on the tone generator. (Only GM-

compatible tone generators respond to this message.)

This turns all sounds off over the current MIDI channel. To turn all sounds off for all MIDI channels,

use All Sound Off in Group B.

This resets the connected tone generator to XG operation. WARNING: Be careful when using this, since

it automatically changes whatever settings you’ve made on the tone generator. (Only XG-compatible tone

generators respond to this message.)

When set to ON, this merges all data received at MIDI IN with the data generated by the CBX-K1. Merge

can be set independently for each channel in the Group B functions.

This determines the MIDI transmit channel for the CBX-K1. This should be set to match the MIDI

receive channel of the connected MIDI device.

This sets a fixed velocity value for the keyboard; in other words, playing the keyboard at any strength

results in a certain velocity value. When this is set to 0 (initial touch on), Touch Sensitivity can be set in

the Group B functions. When ASSIGNABLE Wheel is set to Velocity (147), this is inactive.

This determines the RPN (Registered Parameter Number) for the ASSIGNABLE Wheel. This function

should be used for all RPN’s not listed on the panel. The message must include both MSB and LSB

values.

This determines the Controller Number for the ASSIGNABLE Wheel. Though not all are listed on the

panel, any of the standard Control Change numbers (0 -119) can be assigned. The RPN, NRPN and

Others numbers on the panel can also be assigned here.

This determines the NRPN (Non-Registered Parameter Number) for the ASSIGNABLE Wheel. This

function should be used for all NRPN’s not listed on the panel. The message must include both MSB

and LSB values.

This determines the drum number for use with the drum-related controller numbers (131-141).

This lowers the key transposition by the specified amount (in semitones).

This raises the key transposition by the specified amount (in semitones).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CBX-K1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CBX-K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info