Bedienungsanleitung Yamaha CDRD651 (Seite 17 von 33) (Englisch)

18179

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

E-16

RECORDING FUNCTIONS .....................................................

CD DIRECT Copy

This unit has a CD DIRECT copy function using both disc

trays. It digitally copies an entire source CD placed on disc

tray A onto a disc placed on disc tray B to be used for

copying.

When making a CD DIRECT copy, the copy speed can be

selected at either normal or double speed. However the

recording level cannot be changed when making a CD

DIRECT copy.

Load a source CD on disc tray A and a disc to be

used for copying on disc tray B. Press v (OPEN/

CLOSE on the remote) to close the trays.

Make sure that the recordable time on the disc to be

used for recording is longer than the total play time on

the source CD.

Press and rotate the MULTI JOG knob on the

front panel (MENU and +/– on the remote) to

select “Copy Speed” in the set menu shown in the

display. Then press the MULTI JOG knob (MENU

on the remote) again.

Copy speeds of “x1” and “x2” appear blinking

alternately in the display as the MULTI JOG knob

(+/– on the remote) is rotated. Select the desired

copy speed by pressing the knob (+/– on the

remote).

After the copy speed is set, press COPY to start a

CD DIRECT copy.

When making a CD DIRECT copy with the

synchronized recording mode described in the

next section, press REC MODE to select the

synchronized recording mode and press COPY.

When copying is complete, finalization automatically

starts and the disc can then be played on a standard

CD player. However, finalization is not performed when

doing single or all track synchronized recording.

Notes

• While making a CD DIRECT copy at double speed, the analog

signal can be heard but the digital signal can not.

• Never turn off the power or pull out the plug out from the wall

outlet during a CD DIRECT copy.

• A disc copied from a source CD cannot be copied to another

disc.

See page 28 for Serial Copy Management System (SCMS)

standards.

• If a disc cannot be digitally copied, analog copy is possible. To

make an analog copy, set the “SCMS Mode” to “ANALOG“ in the

menu settings. (See page 11 for details.)

Synchronized Recording

This function automatically starts recording when an audio

signal is detected. Therefore, recording starts at the same

time the source CD starts playback. There are three ways of

doing synchronized recording as follows:

■ Single track synchronized recording

This mode is convenient for recording a mix of tracks from

different sources. A new track marker is automatically

placed at the start of each track.

Load a disc to be used for recording.

Use a disc containing enough space for recording a

source CD.

Press REC to set this unit to the record pause

mode.

Select the appropriate input source to be used for

recording by using INPUT on the front panel.

Adjust the recording level. (See page 15.)

Make sure that the source component is in the

stop mode.

Press REC MODE.

The SINGLE and SYNCHRO indicators light in the

display.

Start playing the source.

• This unit automatically starts recording.

• When playback of the current track is over (digital

recording), or this unit has recorded 4 seconds of

continuous silence as a track separation (analog

recording), recording ends. Then this unit enters the

record pause mode and synchronized recording

mode is canceled.

Repeat steps

and

to record another

track.

Press a when all recording is complete.

Disc information is being written to the PMA (Program

Memory Area).

When all recording is complete, perform finalization. (See

page 21 for the finalization procedure.)

Copy x2

CD–R

–60 –30 –I0 –6 –4 –2 –I0

OVER

DISC B

Recordable

ReWritable

COPY

REC MODE TRACK NO.

FINALIZE ERASE

INPUT

MULTI JOG

DIGITAL REC LEVEL

DISC A DIGITAL ANALOG

PUSH MODE

ANALOG REC LEVEL

MINFADE IN

OUT MAX

REC MUTE

REC

REC MODE INPUT

REC

COPY

FADE IN

OUT

REC

REC MUTE

TRACK NO.

WRITE

REC MODE

FINALIZE ERASE

OPEN

REC

REC MODE

2 1:41

CD–R

44.I

REC

SINGLE

SYNCHRO

–60 –30 –I0 –6 –4 –2 –I0

OVER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDRD651 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CDRD651

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info