Bedienungsanleitung Yamaha CDRD651 (Seite 18 von 33) (Englisch)

18179

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

E-17

GETTING STARTED

PLAYBACK

RECORDING

ADDITIONAL

INFORMATION

ENGLISH

......................................................RECORDING FUNCTIONS

■ All track synchronized recording

This mode is convenient for recording all of the material

from a single audio source such as an MD, cassette tape,

or LP. Track markers are automatically placed between the

tracks being recorded.

1-5.

Repeat the steps described in the previous

section “Single track synchronized recording”.

Press REC MODE twice.

ALL and SYNCHRO indicators light in the display.

Start playing the source.

• This unit automatically starts recording.

• When making a digital recording, a new track

marker is placed each time a new track begins on

the source component.

• When making an analog recording, spaces of

silence are interpreted as track separations, and a

new track marker is placed when a new audio

signal is detected. The silence should be about 4

seconds long.

Once this unit has recorded 20 seconds of

continuous silence, recording ends and “Wait”

lights in the display while the disc information is

being written to the PMA.

After this writing is complete, this unit enters the stop

mode.

When all recording is complete, perform finalization. (See

page 21 for the finalization procedure.)

Notes

• Track numbers may not be correctly recorded depending on the

source component. In this case, perform track marking

manually.

• If the recording source has excessive noise or contains a lot of

low level sound, track marking may not be properly performed

without the silence being recognized. In this case, perform track

marking manually.

• If the sampling frequency changes while making digital

recordings from an external unit, this unit may fail to perform

synchronized recording normally.

■ Full AUTO synchronized recording with

finalization

This mode automatically performs finalization after all

synchronized recording is complete.

(See page 21 for the finalization procedure.)

1-5.

Repeat the steps described in the section

“Single track synchronized recording”.

Press REC MODE three times.

AUTO and SYNCHRO indicators light in the display.

Start playing the source.

This unit automatically starts recording.

Once this unit has recorded 20 seconds of

continuous silence, recording ends and “Wait”

lights in the display while the disc information is

being written to the PMA.

Finalization automatically starts after this writing

is complete.

• Press a to cancel finalization before the 20 seconds

of continuous silence is reached.

• Once finalization is started, operation buttons do not

work.

• Never turn off the power during finalization.

• Recording stops while the source is being played if

there is no more recordable space on a disc, or 99

tracks have been already recorded. In this case,

perform finalization manually.

Note

• When making a synchronized recording after DISC A is selected

using INPUT, track marking and ending are all performed based

on the CD placed on disc tray A. Also recording can be done at

double speed if necessary by changing the copy speed in the

menu settings when DISC A is selected.

2 1:41

CD–R

44.I

REC

ALL SYNCHRO

–60 –30 –I0 –6 –4 –2 –I0

OVER

2 1:41

CD–R

44.I

REC

AUTO

SYNCHRO

–60 –30 –I0 –6 –4 –2 –I0

OVER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDRD651 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CDRD651

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info