Bedienungsanleitung Yamaha CDRS1000 (Seite 15 von 38) (Englisch)

18187

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

E-12

RECORDING FUNCTIONS

English

Recording modes

This recorder features a number of recording modes

allowing you to make recordings from a wide variety of

program sources (both analog and digital).

• When using this unit to make recordings, subcode

information that may be present in the source audio

signal such as CD TEXT, index data, etc., will not be

recorded.

Before recording

•

Set your amplifier or receiver to the source to be recorded.

•

Check that INPUT on the front panel is set appropriately

for the source to be recorded as described on page 7.

About the recording modes

Synchronized recording is recommended when making a

digital recording from a CD or MD, etc.

Manual recording is recommended when making an

analog recording.

Single track synchronized recording

After recording a single track, the unit is put in the record

pause mode. This mode is convenient for recording a mix

of tracks from different sources. See page 13 for this

procedure.

ALL track synchronized recording

When the source component starts to play, all tracks are

recorded and the recording automatically stops after the

last track. This mode is convenient for recording an entire

CD, DAT, MD or LP, etc. See page 14 for this procedure.

Full AUTO synchronized recording

This mode automatically finalizes the disc after ALL track

synchronized recording. See page 15 for this procedure.

Manual recording

This recording mode is used mainly when manual control

of the recording is required or preferred. Recording is

started and stopped manually. See page 16 for this

procedure.

IMPORTANT

•Do not turn off the power during recording. If the

power is turned off, recorded material may be lost

and the disc may not perform normally.

•If a power failure occurs or if the power cord is

pulled out of the wall outlet while recording on a

CD-RW disc, any material recorded before the

information is written to the PMA (Program

Memory Area) will be lost and left unrecorded.

When using a CD-R disc, the disc will no longer

be usable.

•During recording, make sure that the recorder is

not subjected to shock or vibration as this may

cause skips or jumps to be included in the

recording.

In the following cases recording is NOT possible

• When the CD indicator is lit indicating that a CD disc

or finalized CD-R disc is loaded in the recorder.

• When the CD-RW and TOC indicators are lit indicating

that a finalized CD-RW disc is loaded in the recorder.

• When there is no recording time remaining on the disc

and “Disc Full” appears in the display.

•

When 99 tracks have been recorded and “Track Full” appears

in the display. Only 99 tracks may be recorded on a CD disc.

• When the CD-R or CD-RW disc loaded in the recorder

is not intended for recording audio and “Not Audio”

appears in the display.

Notes

• If a source component connected to the DIGITAL IN jacks on

this unit is recorded by another recording device connected to

the DIGITAL OUT jacks on this unit, the recording function

may not perform correctly.

•

Depending on the source component, recording may not always

be possible when using the digital input jacks on this unit.

When recording onto a partially

recorded disc

If a CD-R or CD-RW disc has some recording time

remaining on it before finalization is performed, any of

the recording modes can be performed as normal.

Recording is automatically started from the location

immediately after the last recorded track on the disc.

Before CD-R discs can be played on

standard CD players – Finalization

When you have finished recording on a CD-R disc, it is

necessary to finalize the disc to make it compatible with

standard CD players. If this procedure is not performed, the

CD-R disc will not be playable on a standard CD player.

•

If Full AUTO synchronized recording is performed, finalization

is automatically performed following the conclusion of recording.

Notes for synchronized recording

•When performing synchronized recording of a

Video CD (audio portion only), the synchronized

recording function may not work correctly

depending on the source component being used to

play the Video CD.

•

Depending on the operation of the DVD player, this

unit may not stop the synchronized recording although

20 seconds of silence is continued. In this case, press

(STOP

on the remote) to stop this unit.

•Extremely low level signals will not be recognized

during analog input signal recording and will be

treated as silence. Be aware of low level signals

during synchronized recording.

•Although it takes less than 100 msec to detect

input signals in the synchronized recording mode,

this unit may not record the first portion of input

signals depending on discs. In this case, select the

syncronized recording mode after the manual

recording is started.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDRS1000 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CDRS1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info