Bedienungsanleitung Yamaha CDRS1000 (Seite 18 von 38) (Englisch)

18187

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

E-15

RECORDING FUNCTIONS

The Full AUTO synchronized recording mode

automatically performs finalization after ALL track

synchronized recording (described on the previous page).

Finalization is the final process in recording a CD-R disc

that makes it playable on standard CD players. (CD-RW

discs can only be played back on a CD-RW compatible

player, even if finalization is performed.) Refer to page 20

for more information on finalization.

Synchronized recording

with finalization

NATURAL SOUND CD RECORDER CDR-S1000

POWER

FINALIZE ERASE DISPLAY

TRACK NO.

EFFECT

REC MODE

OPEN/CLOSE

CD DIRECT

REC

INPUT

PHONES

REC LEVEL

LEVEL

DIGITAL/ANALOG

MIN MAX

010

OPTICAL

COAXIAL ANALOG

REC

MUTE

EFFECT

FINALIZE

STOP PAUSE PLAY

SKIP

ERASE REC

REC MUTE

123

456

789

+10

INDEX

REPEAT RANDOM CLEAR PROG

REC MODE

TRACK NO.

WRITE

DIMMER DISPLAY

OPEN/

REC MODE

CD-R

CD TOTAL

REMAIN

PROG

RNDM

REPEAT

SINGLE

EFFECT

REC

ALL

AUTO SYNC

TOC

32 44 48.1

–

60 30 10 6 4 2 1 0 OVER00

––– ––––

CD-R

CD TOTAL

REMAIN

PROG

RNDM

REPEAT

SINGLE

EFFECT

REC

ALL

AUTO SYNC

TOC

X2 X4

32 44 48.1

–

60 30 10 6 4 2 1 0 OVER00

––– ––––

INPUTREC

REC

STOP &

4 Adjust the recording level as described on page 17.

• The recording level of digital and analog sources

can be adjusted.

• Start playing the source to set the recording level.

When the recording level is set, stop playback of

the source component.

• The recording level cannot be changed when the

CD DIRECT function is on.

5 Ensure that the source is in pause or stop mode, as

synchronized recording cannot be started if the

source is playing.

6 Press REC MODE three times.

• The AUTO and SYNC indicators light in the

display.

7 Start playing the source.

• The unit starts recording automatically when it

detects an audio signal.

8 Once the unit has recorded 20 seconds of continuous

silence, recording ends and “Wait” blinks in the

display while information is being written to the

PMA (Program Memory Area). After this is

complete, finalization begins automatically.

• In the Full AUTO synchronized recording mode,

the finalization process following the end of

recording can be canceled by pressing & (STOP &

on the remote) during the 20 seconds of silence at

the end of the recording. If this is done, however, it

will be necessary to perform finalization as

described on page 20.

• When making a recording using the program

playback function of the source component, make

sure that the space between each track is under 10

seconds.

• Operation buttons do not respond once finalization

has begun.

• Never turn the power off during finalization!

• System operation stops automatically without

performing finalization when there is no more

recording time or when 99 tracks have already been

recorded.

1 Load a CD-R or CD-RW disc containing space for

recording.

• To ensure proper recording, make sure that you

have more than enough space on the disc.

2 Press REC.

• This unit enters record pause mode.

3 Set INPUT on the front panel to the appropriate input

to be used for recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CDRS1000 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CDRS1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info