Bedienungsanleitung Yamaha CLP-156 (Seite 15 von 45) (Englisch)

590511

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

The Metronome & Tempo Control

The CLP-156 built-in metronome is a convenient feature for practice, and it can also provide

a solid rhythmic guide when recording using the Recorder feature, described below.

The metronome sound is turned on and off via the [METRONOME] button. Press the

[METRONOME] button so that its indicator lights to turn the metronome on and then

again so that the indicator goes out to turn the metronome off. When the metronome is on

the current measure number is shown on the TEMPO display.

NOTE

• The metronome will not function when the supplied PianoSoft demonstration disk or a

Disklavier PianoSoft disk is in the disk drive.

The volume of the metronome sound can be independently adjusted by using the

TEMPO [s] and [t] buttons while holding the [METRONOME] button. The first time

either button is pressed the current volume setting appears on the TEMPO display, then

pressing the [s] button increases the volume while the [t] button decreases the volume.

Press both the [s] and [t] buttons simultaneously to instantly recall the default (“8”)

setting.

■ A setting of “1” sets the minimum metronome volume.

■ A setting of “8” sets the default metronome volume.

■ A setting of “15” sets the maximum metronome volume.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the specified direc-

tion.

The time signature of the metronome sound can be set by pressing the appropriate

voice selector button while holding the [METRONOME] button, as follows:

METRONOME

The Metronome

● Metronome Volume

METRONOME

TEMPO

▲

▼

● Metronome Time

Signature

Tempo Control

The tempo of the Metronome as well as the song recording and playback functions can be

adjusted from 32 to 280 quarter-note beats per minute via the TEMPO [s] and [t] but-

tons. The current tempo normally appears on the TEMPO display. Although the TEMPO

display shows the current measure number during Metronome, song recording or play-

back operation, the tempo value is displayed when either of the TEMPO buttons are

pressed, and remains on the display for about one second after the TEMPO buttons are

released. “_ _ _” is displayed for any tempo value during playback of the supplied

PianoSoft demonstration disk or optional Disklavier PianoSoft disks.

The default tempo of 120 beats per minute is automatically set when the power is ini-

tially turned on. Press the TEMPO [s] and [t] buttons simultaneously to instantly re-

call the default tempo (120) at any time. The tempo value of the selected song is recalled

if the TEMPO [s] and [t] buttons are pressed simultaneously when a song which con-

tains data is selected.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the specified direc-

tion.

1.20

Beat Indicator

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

METRONOME

No accent/

4 time 2 time 3 time

1st Beat

2nd Beat

3rd Beat

4th Beat

[METRONOME] + [PIANO 1] No accent (default)

[METRONOME] + [PIANO 2] 2 time

[METRONOME] + [CLAVINOVA TONE] 3 time

[METRONOME] + [E. PIANO] 4 time

The dots on the TEMPO display flash to indicate the current beat within

the current measure, as shown to the left.

TEMPO

▲

▼

120

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-156 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info