Bedienungsanleitung Yamaha CLP-156 (Seite 16 von 45) (Englisch)

590511

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Disk Playback

Performance data on the supplied PianoSoft demonstration disk (others are available from Yamaha), as

well as original performances you record using the Clavinova’s Recorder function (page 18) can be played

back as described below.

Insert the disk containing the data to be played back into the disk

drive, with the sliding door facing the drive slot and the label side facing

upward. The disk should click into place and the disk lamp will light

briefly while the Clavinova reads and identifies the disk. Song number

“1” will also appear on the display.

NOTE

• Any recorded data in the CLP-156 memory (i.e. data recorded with-

out first inserting a disk) will be erased when:

(1) the supplied PianoSoft demonstration disk or an optional

PianoSoft disk is inserted.

(2) a disk containing original performance data is inserted and the

“Select a Song Number” operation, below, is carried out.

If you want to keep the data that is in the instrument’s memory, copy

it to a recordable disk as described on page 20 before doing any of

the above.

Use the SONG [r] and [f] buttons to select the song number you

want to play. Select “ALL” if you want all songs on the disk to be played

back in sequence. When the desired song number is selected the [1/R]

and [2/L] track button indicators will glow green if the corresponding

tracks contain performance data.

NOTE

• The songs can be made to play back and repeat either in sequence

or in random order when “ALL” is selected, depending on the setting

of the “All-song Random Repeat” function (page 28).

Start playback of the selected song by pressing the [PLAY] button.

Unless “ALL” is selected, the selected song will play through to the end

and playback will stop automatically. The current measure number will

be shown on the display during playback. It is also possible to play along

on the keyboard during playback.

NOTE

• The measure number display may not be accurate with some songs.

• It is possible to change the playback voice by using the panel voice

selectors during playback of the supplied PianoSoft demonstration

disk or an optional Disklavier PianoSoft disk. In this case the play-

back voice will become the same as the voice played via the key-

board. The playback voice cannot be changed when playing back

other types of disks (the keyboard voice can be changed).

Adjust the playback volume as required via the [MASTER VOL-

UME] control.

Although playback will stop automatically at the end of the song, it

can be stopped at any time by pressing the [PLAY] button.

When you’ve finished with the currently loaded disk, simply press the

disk drive EJECT button to remove it.

CAUTION

• NEVER eject a disk or turn the power off while the disk drive lamp is

on or a disk is playing back.

Z Insert a Disk

NEject the Disk When Done

X Select a Song Number

RECORDER

1/R

2/L

PLAY

REC

SONG

C Start Playback

RECORDER

1/R

2/L

PLAY

REC

V Adjust the Volume

BStop Playback

MASTER VOLUME

MIN MAX

PLAY

REC

Song Number

Measure Number

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-156 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info