Bedienungsanleitung Yamaha CLP-265GP (Seite 43 von 72) (Englisch)

590559

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Detailed Settings – [FUNCTION]

CLP-265GP Owner’s Manual

ENGLISH

You can make detailed adjustments to MIDI

settings.

For more information about MIDI, see the

“About MIDI” section (page 47).

1. Engage the Function mode and select .

2. Press the [+/YES] button to engage the MIDI

function’s sub-mode, then use the [TEMPO/

FUNCTION# ▼, ▲] buttons to select the

desired sub-mode.

Press the [–/NO] or [+/YES] button to set a

selected parameter.

Sub-mode

F7.1: MIDI Transmit Channel Selection

In any MIDI control setup, the MIDI channels of the

transmitting and receiving equipment must be matched

for proper data transfer.

This parameter enables you to specify the channel on

which the Clavinova transmits MIDI data.

Setting range: 1 – 16, OFF (not transmitted)

Normal setting: 1

F7.2: MIDI Receive Channel Selection

In any MIDI control setup, the MIDI channels of the

transmitting and receiving equipment must be matched

for proper data transfer. This parameter enables you to

specify the channel on which the Clavinova receives

MIDI data.

Setting range: ALL, 1&2, 1 – 16

Normal setting: ALL

F7.3: Local Control ON/OFF

“Local Control” refers to the fact that, normally, the

CLP-265GP keyboard controls its internal tone genera-

tor, allowing the internal voices to be played directly

from the keyboard. This situation is “Local Control On,”

since the internal tone generator is controlled locally by

its own keyboard.

Local control can be turned OFF, however, so that the

CLP-265GP keyboard does not play the internal voices,

but the appropriate MIDI information is still transmitted

via the MIDI OUT terminal when notes are played on

the keyboard. At the same time, the internal tone genera-

tor responds to MIDI information received via the MIDI

IN terminal.

Setting range: ON/OFF

Normal setting: ON

F7. MIDI Functions

All MIDI settings described below will affect the MIDI signal

in and out of the USB [TO HOST] connector.

NOTE

In Dual mode, Voice 1 data is transmitted on its specified

channel. In Dual mode, Voice 2 data is transmitted on the

next greater channel number relative to the specified chan-

nel. In either mode, no data is transmitted if the transmit

channel is set to “OFF.”

NOTE

Song data is not transmitted via the MIDI connections. How-

ever, channels 3-16 of non-protected External songs will be

transmitted via the MIDI connections depending on the

Song Channel Selection setting (page 42).

NOTE

ALL:

“Multi-timbre” Receive mode. This allows simultaneous

reception of different parts on all 16 MIDI channels, enabling

the Clavinova to play multi-channel song data received from

a music computer or sequencer.

1&2:

“1&2” Receive mode. This allows simultaneous reception on

channels 1 and 2 only, enabling the Clavinova to play 1 and

2 channel song data received from a music computer or

sequencer.

NOTE

Program change and other like channel messages received

will not affect the CLP-265GP’s panel settings or the notes

you play on the keyboard.

NOTE

No MIDI reception occurs when Demo mode is engaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-265GP Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-265GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info