Bedienungsanleitung Yamaha CLP-265GP (Seite 44 von 72) (Englisch)

590559

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Detailed Settings – [FUNCTION]

CLP-265GP Owner’s Manual

ENGLISH

F7.4: Program Change ON/OFF

Normally the CLP-265GP will respond to MIDI program

change numbers received from an external keyboard or

other MIDI device, causing the correspondingly-num-

bered voice to be selected on the corresponding channel

(the keyboard voice does not change). The CLP-265GP

will normally also send a MIDI program change number

whenever one of its voices is selected, causing the corre-

spondingly-numbered voice or program to be selected

on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers.

This function makes it possible to cancel program

change number reception and transmission so that

voices can be selected on the CLP-265GP without affect-

ing the external MIDI device.

Setting range: ON/OFF

Normal setting: ON

F7.5: Control Change ON/OFF

Normally the CLP-265GP will respond to MIDI control

change data received from an external MIDI device or

keyboard, causing the voice on the corresponding chan-

nel to be affected by pedal and other “control” settings

received from the controlling device (the keyboard voice

is not affected).

The CLP-265GP also transmits MIDI control change

information when the pedal or other appropriate con-

trols are operated.

This function makes it possible to cancel control change

data reception and transmission so that, for example, the

CLP-265GP’s pedal and other controls can be operated

without affecting an external MIDI device.

Setting range: ON/OFF

Normal setting: ON

F7.:

Panel/Status Transmit

This function causes all the current CLP-265GP panel

settings (selected voice, etc.) to be transmitted via the

MIDI OUT terminal.

Procedure

1. Set up the panel controls as desired.

2. Connect the Clavinova to a sequencer via MIDI, and

set up the sequencer so it can receive the setup data.

3. Engage the Function mode and select .

4. Press the [+/YES] button to transmit the panel/status

data.

will appear on the LED display when the data has

been successfully transmitted.

F7.7:

Initial Setup Send

This function lets you send the data of the panel settings

to a computer. By transmitting the panel settings and

recording them on the MIDI sequence recorder prior to

the actual performance data, the instrument will be

automatically restored to the same settings when the per-

formance is played back. You can also use this function to

change the settings of a connected tone generator to the

same settings as the instrument.

Procedure

1. Set up the panel controls as desired.

2. Connect the Clavinova to a sequencer via MIDI, and

set up the sequencer so it can receive the setup data.

3. Engage the Function mode and select .

4. Press the

[+/YES] button to transmit the panel/status

data.

will appear on the LED display when the data has

been successfully transmitted.

The following data can be sent.

•Voice selection

• [REVERB] type

• [REVERB] depth

• [EFFECT] type

• [EFFECT] depth

•Tuning (F1)

•Dual detune (F3.2)

NOTE

For information on program change numbers for each of the

CLP-265GP’s voices, refer to page 62 in the MIDI Data Format

section.

NOTE

For information on control changes that can be used with

the CLP-265GP, refer to the MIDI Data Format on page 61.

TERMINOLOGY

Setup Data:

Data that contains a set of panel settings for the Clavinova.

NOTE

See page 62 for a list of the “Panel Data Contents” transmitted by

this function.

NOTE

Receiving the transmitted data:

1. Connect the Clavinova via MIDI to the device to which

the setup data was transmitted previously.

2. Start sending the setup data from the device.

The Clavinova automatically receives the setup data, which

will be reflected in the panel settings.

(For the data to be accepted, the Clavinova that receives

the setup data should be the same model as the one that

transmitted the setup data to the sequencer.)

NOTE

For more information on transmitting and receiving setup

data via MIDI, refer to the owner’s manual for the connected

MIDI device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-265GP Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-265GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info