Bedienungsanleitung Yamaha CLP-411 (Seite 26 von 54) (Englisch)

590692

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

The Function Mode

Dual Mode Functions

After selecting “F3.Y”, press the [+/YES] button to engage the dual-mode function sub-

mode, then use the [<] and [>] buttons to select the desired dual mode function, as listed

below.

If the Dual mode is not engaged “F3.-” will appear instead of “F3.Y” and the Dual mode

functions cannot be selected. If this happens engage the Dual mode and proceed.

■ SHORTCUT: You can jump directly to the dual-mode functions (F3) by pressing the

[FUNCTION] button while holding the two dual-mode voice selectors

corresponding to the voices you want to combine in the dual mode.

F3.1: Dual Balance.....................................................................................................................................

The volume levels of the two voices combined in the dual mode can be adjusted as re-

quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as

required. The balance range is from 0 through 20. A setting of “10” produces equal balance

between the two dual-mode voices. Settings below “10” increase the volume of the 2nd voice

in relation to the 1st voice, and settings above “10” increase the volume of the 1st voice in

relation to the 2nd voice (“1st” and “2nd” refer to the left and right voice selectors, respec-

tively). Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting

(different for each voice combination).

F3.2: Dual Detune .......................................................................................................................................

This function makes it possible to detune the 1st and 2nd dual-mode voices to create a

thicker sound. Use the [–/NO] and [+/YES] buttons to set the amount of detuning as required.

The detune range is from –10 through 10. A setting of “0” sets both voices to the same pitch.

Settings below “0” increase the pitch of the 2nd voice in relation to the 1st voice, and settings

above “0” increase the pitch of the 1st voice in relation to the 2nd voice (“1st” and “2nd” refer

to the left and right voice selectors, respectively). Press the [–/NO] and [+/YES] buttons

simultaneously to recall the default setting (different for each voice combination).

F3.3: 1st Voice Octave Shift ............................................................................................................

F3.4: 2nd Voice Octave Shift ..........................................................................................................

Depending on which voices you combine using the dual mode, the combination may sound

better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]

buttons to set the octave of the 1st or 2nd voice as required (“1st” and “2nd” refer to the left

and right voice selectors, respectively). The available settings are “0” for normal pitch, “–1” to

shift the pitch down one octave, and “1” to shift the pitch up one octave. Press the [–/NO] and

[+/YES] buttons simultaneously to recall the default setting (different for each voice combina-

tion).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-411 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-411

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info