Bedienungsanleitung Yamaha CLP-480 (Seite 51 von 96) (Englisch)

590718

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Advanced Functions

Connections

This instrument features a built-in [USB TO DEVICE] terminal. When connecting a USB device to the

terminal, be sure to handle the USB device with care. Follow the important precautions below.

Connecting a USB storage device

Precautions when using the [USB TO

DEVICE] terminal

This instrument features a built-in [USB TO

DEVICE] terminal. When connecting a USB device

to the terminal, be sure to handle the USB device with

care. Follow the important precautions below.

NOTE

For more information about the handling of USB devices, refer

to the owner’s manual of the USB device.

 Compatible USB devices

• USB storage devices (flash memory, hard disk drive,

etc.)

•USB hub

The instrument does not necessarily support all

commercially available USB devices. Yamaha cannot

guarantee operation of USB devices that you purchase.

Before purchasing a USB device for use with this

instrument, please visit the following web page:

http://music.yamaha.com/download/

NOTE

Other USB devices such as a computer keyboard or mouse

cannot be used.

 Connecting USB device

When connecting a USB device to

the [USB TO DEVICE] terminal,

make sure that the connector on the

device is appropriate and that it is

connected in the proper direction.

NOTICE

When connecting a USB device to the [USB TO DEVICE]

terminal on the top panel, remove it before closing the key

cover. If the key cover is closed with the USB device

connected, the USB device may be damaged.

• When connecting a USB cable, Use it less than 3

meters.

• If you intend to connect two or three devices at the

same time to a terminal, you should use a USB hub

device. The USB hub must be self-powered (with its

own power source) and the power must be on. Only

one USB hub can be used. If an error message appears

while using the USB hub, disconnect the hub from the

instrument, then turn on the power of the instrument

and re-connect the USB hub.

• Though the instrument supports the USB 1.1

standard, you can connect and use a USB 2.0 storage

device with the instrument. However, note that the

transfer speed is that of USB 1.1.

Using USB Storage Devices

By connecting the instrument to a USB storage

device, you can save data you’ve created to the

connected device, as well as read data from the

connected device.

 The number of USB storage device to be

used

Up to two USB storage devices can be connected to

the [USB TO DEVICE] terminal. (If necessary, use a

USB hub. The number of USB storage devices that

can be used simultaneously with musical instruments

even when a USB hub is used is a maximum of two.)

This instrument can recognize up to four drives in

one USB storage device.

 Formatting USB storage media

When a USB storage device is connected or media is

inserted, a message may appear prompting you to

format the device/media. If so, execute the Format

operation (page 46).

NOTICE

The format operation overwrites any previously existing data.

Make sure that the media you are formatting does not contain

important data. Proceed with caution, especially when

connecting multiple USB storage media.

 To prote ct your d ata (write- prote ct)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each

storage device or media. If you are saving data to the

USB storage device, make sure to disable write-

protect.

 Connecting/removing USB storage device

Before removing the media from the device, make

sure that the instrument is not accessing data (such as

in the Save, Copy, Delete and Format operations).

NOTICE

Avoid frequently turning the power on/off to the USB storage

device, or connecting/disconnecting the device too often.

Doing so may result in the operation of the instrument

“freezing” or hanging up. While the instrument is accessing

data (such as during Save, Copy, Delete, and Format

operations) or is mounting the USB storage device (shortly

after the connection), do NOT unplug the USB connector, do

NOT remove the media from the device, and do NOT turn the

power off to either device. Doing so may corrupt the data on

either or both devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-480 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info