Bedienungsanleitung Yamaha CLP-480 (Seite 52 von 96) (Englisch)

590718

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Advanced Functions

Connections

By connecting a computer to the USB [TO HOST] or MIDI terminals, you can transfer data between the

instrument and the computer via MIDI, and take advantage of sophisticated computer music software.

1. Before connection, turn off the power of this instrument.

2. Start the computer.

Do not start any applications on the computer.

3. Connect the instrument and compute via a USB cable.

Make the connection directly without passing through a USB hub.

4. Turn on the power of this instrument.

The USB-MIDI driver will be installed to the computer automatically.

OS: Windows XP (SP3 and later), Windows Vista, Windows 7, Mac OS X Version

10.5 – 10.6.x

When data communication is unstable or some problem occurs even though you’ve

executed the above instructions, download the Yamaha Standard USB-MIDI driver

from the following URL then install it to your computer. For instructions on

installation, refer to the Install Guide included in the package file.

http://music.yamaha.com/download/

For details about OS for Yamaha Standard USB-MIDI driver, visit the URL above.

Connecting a computer

NOTE

Also the MIDI [IN] and [OUT]

terminals can be used to make

the connection between the

computer and the instrument.

In this case, use the MIDI

interface such as Yamaha

UX16 instead of a USB cable.

For instruction on connecting,

refer to the manual of the MIDI

interface.

NOTE

For information on setting up

your sequence software, refer

to the owner’s manual of the

relevant software.

Clavinova

USB [TO HOST] terminal

USB cable

Computer

Precautions when using the USB [TO HOST] terminal

When connecting the computer to the USB [TO HOST] terminal, make sure to observe the following points. Failing to do

so risks freezing the computer and corrupting or losing the data. If the computer or the instrument freezes, restart the

application software or the computer OS, or turn the power to the instrument off then on again.

NOTICE

• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• Before connecting the computer to the USB [TO HOST] terminal, exit from any power-saving mode of the computer (such as

suspend, sleep, standby).

• Before turning on the power to the instrument, connect the computer to the USB [TO HOST] terminal.

• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from the USB [TO

HOST] terminal.

- Quit any open application software on the computer.

- Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard or

playing back a song.)

• While the computer is connected to the instrument, you should wait for six seconds or more between these operations: (1) when

turning the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-480 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info