Bedienungsanleitung Yamaha CLP-930 (Seite 30 von 66) (Englisch)

593324

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

CLP-950/930

F4.2: Split Balance.....................................................................................................................................

The volume levels of the two voices combined in the split mode can be adjusted as re-

quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as

required. The balance range is from 0 through 20. A setting of “10” produces equal balance

between the two split-mode voices. Settings below “10” increase the volume of the Left Voice

in relation to the Right Voice, and settings above “10” increase the volume of the Right Voice

in relation to the Left Voice. Press the [–/NO] and [+/YES] buttons simultaneously to recall

the default setting (different for each voice combination).

F3.5: 1st Voice Effect Depth.............................................................................................................

F3.6: 2nd Voice Effect Depth ...........................................................................................................

These functions make it possible to individually set the depth of the effect for the 1st and

2nd dual-mode Voices (“1st” and “2nd” is explained on page 16). Use the [–/NO] and [+/

YES] buttons to set the effect depth for the corresponding voice as required. The depth range

is from 0 through 20. A setting of “0” produces no effect, while a setting of “20” produces

maximum effect depth. Press the [–/NO] and [+/YES] buttons simultaneously to recall the

default setting (different for each voice combination).

NOTE

• The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be

exited before EFFECT can be turned ON.

F3.7: Reset..........................................................................................................................................................

This function resets all dual-mode functions to their default values. Press the [+/YES]

button to reset the values. “End” will appear on the display when all functions have been

reset.

CLP-950 Split Mode Functions

After selecting “F4.Y”, press the [+/YES] button to engage the split-mode function sub-

mode, then use the [TEMPO/FUNCTION t, s] buttons to select the desired split mode

function, as listed below.

If the Split mode is not engaged “F4.-” will appear instead of “F4.Y” and the Split mode

functions cannot be selected. Also note that you must exit from the Function mode before the

Split mode can be engaged.

■ SHORTCUT: You can jump directly to the split-mode functions (F4) by pressing the

[FUNCTION] button while holding the [SPLIT] button.

NOTE

• Split mode function settings are set individually for each voice combination.

F4.1: Split Point .............................................................................................................................................

In addition to the split point setting method described on page 17, the split point can be set

via this function. Use the [–/NO] and [+/YES] buttons to set the split point as required, or

simply press the appropriate key on the keyboard: from “A-1” to “C7”. Press the [–/NO] and

[+/YES] buttons simultaneously to recall the default setting “F#2”.

The Function Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-930 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-930

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info