Bedienungsanleitung Yamaha CLP-930 (Seite 31 von 66) (Englisch)

593324

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

CLP-950/930

F4.3: Right Voice Octave Shift.......................................................................................................

F4.4: Left Voice Octave Shift...........................................................................................................

Depending on which voices you combine using the split mode, the combination may sound

better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]

buttons to set the octave of the Left or Right Voice as required. The available settings are “0”

for normal pitch, “–1” to shift the pitch down one octave, and “1” to shift the pitch up one

octave. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting

(different for each voice combination).

Set according to the pitch extent for the song you want to play.

F4.5: Right Voice Effect Depth ......................................................................................................

F4.6: Left Voice Effect Depth...........................................................................................................

These functions make it possible to individually set the depth of the effect for the Left and

Right split-mode Voices. Use the [–/NO] and [+/YES] buttons to set the effect depth for the

corresponding voice as required. The depth range is from 0 through 20. A setting of “0”

produces no effect, while a setting of “20” produces maximum effect depth. Press the [–/NO]

and [+/YES] buttons simultaneously to recall the default setting (different for each voice

combination).

NOTE

• The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be

exited before EFFECT can be turned ON.

F4.7: Damper Range ................................................................................................................................

The Damper Range function determines whether the damper pedal affects the Right Voice,

the Left Voice, or both the Left and Right Voices in the split mode. Use the [–/NO] and [+/

YES] buttons to select “2” for the Left Voice, “1” for the Right Voice, or “ALL” for both

voices. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting

“ALL”.

F4.8: Reset..........................................................................................................................................................

This function resets all split-mode functions to their default values. Press the [+/YES]

button to reset the values. “End” will appear on the display when all functions have been

reset.

This function sets the left pedal for normal soft-pedal operation or for song start/stop

operation. Use the [–/NO] and [+/YES] buttons to select the desired left-pedal mode. “1” is

the normal soft-pedal mode, and “2” is the start/stop mode. When the start/stop mode is

selected, the left pedal functions in the same way as the panel SONG [START/STOP] button.

Press the

[–/NO] and [+/YES] buttons simultaneously to recall the default setting “1”.

CLP-930 Left Pedal Mode

The Function Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-930 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-930

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info