Bedienungsanleitung Yamaha CLP230 (Seite 22 von 90) (Englisch)

27512

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Selecting & Playing Voices

CLP-240/230 Owner’s Manual

ENGLISH

Pressing the [REVERB] button repeatedly toggles the reverb on and off.

The indicators light in sequence each time the [REVERB] button is pressed. No effect is

produced when all indicators are off.

Adjusting Reverb Depth

Adjust the reverb depth for the selected voice by using the [–/NO] [+/YES] buttons

while holding the [REVERB] button. The depth range is from 0 through 20. The current

depth setting appears on the LED display while the [REVERB] button is held.

[EFFECT]

The [EFFECT] button allows you to select an effect to give your sound greater depth and

animation.

OFF: When no effect is selected, no EFFECT indicator is lit.

CHORUS: A shimmering, broadening effect

PHASER: Adds a sweeping effect to the sound.

TREMOLO: Tremolo effect

ROTARY SP:Adds the vibrato effect of a rotary speaker.

To select an effect type, press the [EFFECT] button a few times until the indicator corre-

sponding to the desired type lights (the indicators light in sequence each time you press

the [EFFECT] button). No effect is produced when all indicators are off.

Adjusting Effect Depth

You can adjust the effect depth for the selected voice by using the [–/NO] and [+/YES]

buttons while holding the [EFFECT] button.

The depth range is from 0 through 20. The current depth setting appears on the LED

display while the [EFFECT] button is held.

[DDE] (CLP-240)

The DDE (Dynamic Damper Effect) lets you hear a simulation of the sustain sound of

the damper pedal on a grand piano, as you press the damper pedal and play the key-

board. This effect is applied to the entire sound of the instrument.

Pressing the [DDE] button repeatedly toggles the DDE on and off.

Adjusting DDE Depth

You can adjust the DDE depth by using the [–/NO] and [+/YES] buttons while holding

the [DDE] button.

The depth range is from 0 through 20. The current depth setting appears on the LED

display while the [DDE] button is held.

Procedure

NOTE

Releasing the [REVERB] button

changes the reverb type.

If you are changing the reverb

depth by holding the [REVERB]

button, pressing the [REVERB]

button will not change the reverb

type.

NOTE

Depth 0: no effect

Depth 20: maximum reverb depth

NOTE

Default depth settings are differ-

ent for each voice.

NOTE

The default effect type (including

OFF) and depth settings are dif-

ferent for each voice.

Procedure

NOTE

Releasing the [EFFECT] button

changes the effect type.

If you are changing the depth set-

tings by holding the [EFFECT]

button, pressing the [EFFECT]

button will not change the effect

type.

NOTE

Depth 0: no effect

Depth 20: maximum effect depth

NOTE

Default depth settings are differ-

ent for each voice.

NOTE

Normal setting = ON

NOTE

Depth 0: no effect

Depth 20: maximum DDE depth

Procedure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP230 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info