Bedienungsanleitung Yamaha CP5 (Seite 10 von 68) (Englisch)

516892

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Control Panel

10 CP5/CP50 Owner’s Manual

Component Names & Functions

Control Panel

(Diagram shows CP5)

1Pitch bend wheel (page 30)

Use this controller to temporarily shift the pitch of notes

upward or downward.

2Headphones jack (page 15)

Use this standard audio jack to connect a pair of stereo

headphones.

3[GAIN] knob (page 40)

Turn this knob to adjust the input gain for audio signals

coming from the CP5’s [MIC INPUT] jack. This type of

adjustment may be necessary as different microphones

output signals at a wide range of volumes. Increase the gain

by rotating the knob clockwise, and decrease it by rotating

the knob counter-clockwise.

4[MASTER VOLUME] dial (page 17)

Turn this dial to adjust the overall volume of the stage piano.

5Part Volume knobs

Use these knobs to set the individual volumes of the various

parts making up the currently selected Performance (page

22). Increase the part volume by rotating its knob clockwise,

and decrease it by rotating the knob counter-clockwise. The

lamp to the bottom-right of each knob lights up whenever the

corresponding part is selected. From left to right, the Part

Volume knobs on the CP5 are labeled [MIC INPUT],

[TRACK], [LEFT2], [LEFT1], [RIGHT2], and [RIGHT1]. On the

CP50, meanwhile, these knobs are labeled [TRACK], [LEFT],

and [RIGHT].

6Part buttons

Press these buttons to toggle the various parts making up

the currently selected Performance on or off as required. The

lamp to the top-left of each Part button lights up whenever

the corresponding part is turned on. Furthermore, if you

press and hold one of these buttons (for at least one

second), the corresponding part will be selected, its

parameter setting screen will be displayed, and its lamp will

start to flash. Even if a part’s parameter setting screen is

being displayed, it can still be toggled on and off by

pressing the corresponding Part button. It should be noted

that these lamps will flash in one of two different ways to

indicate whether the part is on or off; specifically, the lamp

stays lit longer when the part is on, and it stays off longer

when the part is off. From left to right, the Part buttons on the

CP5 are labeled [MIC INPUT], [TRACK], [LEFT2], [LEFT1],

[RIGHT2], and [RIGHT1]. On the CP50, meanwhile, these

buttons are labeled [TRACK], [LEFT], and [RIGHT].

7[SPLIT] button (page 32)

Press this button to toggle the splitting of Performance zones

on and off. The lamp to the top-left of the button lights up

whenever splitting is turned on. The same operation can be

performed using the Split parameter from the Common

Settings screen.

8[VOICE] button (page 33)

Press this button to open the parameter setting screen for the

currently selected part’s Voice block. The lamp to the top-left

of the button lights up whenever this screen is being

displayed.

!8 @ # &

9 ) $ % ^

A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3

(

CP5 only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP5 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info