Bedienungsanleitung Yamaha CP5 (Seite 11 von 68) (Englisch)

516892

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Control Panel

CP5/CP50 Owner’s Manual 11

Component Names & Functions

9[STORE/ASSIGN] button (pages 28

, 50)

Press this button to call up a screen for storing Performances

and system settings. In addition, by pressing and holding

the [STORE/ASSIGN] button (for at least one second) within

the Performance screen or a parameter setting screen (for

any block other than the Master Equalizer or Master

Compressor), you can call up a screen for directly assigning

each of the Knobs 1 to 3 (see ( below) to block parameters.

)[COMMON] button (page 35)

Press this button to open the parameter setting screen for

the Common Settings area, which affects each of the left and

right parts in the same way. The lamp to the top-left of the

button lights up whenever this screen is being displayed.

![PRE-AMP] button (pages 31, 34)

@[MOD-FX] button (pages 31, 34)

#[PWR-AMP] button (pages 31, 34)

$[REVERB] button (pages 31, 35)

Press these buttons to toggle on and off the Pre-Amplifier

block, Modulation Effect block, or Power-Amplifier /

Compressor block (CP5 only) for currently-selected part or

the Reverb block. The lamp to the top-left of each button

lights up whenever the corresponding block is turned on. It

should be noted, however, that the Pre-Amplifier block has

an effect on the sound only if a voice from the PIANO or

E.PIANO category has been selected for the part in

question. Furthermore, if you press and hold one of these

buttons (for at least one second), the parameter setting

screen for the corresponding block will be displayed, and

the lamp to the top-left of the button will start to flash. Even if

a block’s parameter setting screen is being displayed, it can

still be toggled on and off by pressing the corresponding

button. It should be noted that these lamps will flash in one of

two different ways to indicate whether the block is on or off;

specifically, the lamp stays lit longer when the block is on,

and it stays off longer when the block is off.

%[SONG SETTING] button (page 37)

Press this button to open the Song Setting screen. The lamp

to the top-left of the button lights up whenever this screen is

being displayed.

^[REC] button (page 41)

Press this button to open the Record screen. The lamp to the

top-left of the button lights up whenever this screen is being

displayed.

&Sequencer Transport buttons (pages 37, 42)

Use these buttons to control the recording and playback of

backing tracks.

[LL ] (Rewind) button

Whenever you are using a Preset Drum Pattern or a User

Song as the backing track, pressing this button will move the

play position back by one measure at a time. Alternatively, if

you are using a Wave file as the backing track, pressing this

button will move the play position back by one second at a

time. Press and hold the button to rewind continuously.

CB E HJ

A D F G I K

B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7

CP5 only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP5 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info