Bedienungsanleitung Yamaha CP5 (Seite 13 von 68) (Englisch)

516892

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Rear Panel

CP5/CP50 Owner’s Manual 13

Component Names & Functions

Rear Panel

CP5

CP50

1P switch (page 16)

On the CP5, this button is known as the Power switch, and it

is used to turn the stage piano on (O) and off (N). On the

CP50, it is known as the Standby/On switch, and it is used to

set the stage piano to on (O) or Standby mode (N).

2[AC IN] socket (page 14)

Use this socket to connect the power cord. Note that only the

power cord provided with the CP5 should be used to supply

power.

3MIDI [IN], [OUT], and [THRU] connectors

(page 45)

Use the three MIDI connectors to link up your CP5 or CP50

with other MIDI devices.

4[USB TO HOST] port (page 46)

Use this port to connect your CP5 or CP50 to a computer

using a USB cable.

5[SUSTAIN] foot-switch jack (pages 16, 29)

An optional FC3 foot pedal or an optional FC4 or FC5 foot

switch can be connected via the [SUSTAIN] foot-switch jack

for use as a dedicated sustain pedal.

6[ASSIGNABLE] foot-switch jack (pages 16, 29)

Use this jack to connect an optional FC4 or FC5 foot switch

in order to perform a range of freely assignable functions.

7Foot-controller jack(s) (page 16)

Use the foot-controller jack(s) to connect an optional FC7 or

FC9 foot controller in order to perform a range of freely

assignable functions. Note that the CP5 features a pair of

foot-controller jacks, which are labeled [1] and [2], while the

CP50 has single such jack labeled [FOOT CONTROLLER].

8Unbalanced [L/MONO] and [R] output jacks

(page 15)

These two 1/4" mono phone jacks are used to output

unbalanced stereo signals. Alternatively, if mono output is

required, only the [L/MONO] jack should be connected.

Each connector's nominal output level is +4 dBu.

9Balanced [L] and [R] output connectors

(page 15)

These XLR-type connectors are used to output balanced

stereo signals to mixers and other similar devices. This type

of connector protects signals from interference and has an

extremely sturdy design. It also features a locking

mechanism to prevent cables from being accidentally

disconnected. Accordingly, the XLR connector is regularly

used in professional environments that demand a high level

of reliability. Each connector's nominal output level is +4

dBu.

)[MIC INPUT] jack (page 40)

Use this combo jack* to input audio into the CP5. With a

microphone plugged into this jack, you can use the MIC

INPUT part (page 22) from the currently selected

Performance to process your vocals. (*: Combo jacks can

accept both XLR and 1/4" phone plugs.)

![USB TO DEVICE] port (page 25)

USB flash-memory devices can be plugged into the CP50

via this port.

@DC IN connector (page 14)

Use this connector for the CP50’s bundled power adaptor.

1 2 3 )64 5 97 8

6 7 4 1! @5 8

CP5 only

CP50 only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP5 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info