Bedienungsanleitung Yamaha CP5 (Seite 49 von 68) (Englisch)

516892

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Storing Settings

CP5/CP50 Owner’s Manual 49

Quick Start Guide

Storing Settings

Memory Structure

The following diagram shows the structure of the internal memory within your CP5 or CP50 and illustrates how data is

exchanged with external devices.

Flash ROM

As its name suggests, Read Only Memory (ROM) is a type of memory designed specifically for reading of data, and as

such, it cannot usually be written to. Flash ROM differs from the conventional type in that it can be overwritten — allowing

you to store and delete data. Furthermore, the content of flash ROM is maintained even when the power is turned off.

DRAM

The term Random Access Memory (RAM) is used to describe memory designed for both reading and writing of data.

RAM is categorized into two different types based on the way in which content is stored — namely, static RAM (SRAM)

and dynamic RAM (DRAM). It is the latter type that is used for the Edit Buffer in your CP5 or CP50. As the data stored in

DRAM is lost whenever the power is turned off, any important content should be transferred to flash ROM (i.e., User

Memory) before doing so.

Edit Buffer & User Memory

The name Edit Buffer is given to an area of memory used to edit a single Performance or system setting. As this memory

area is non-permanent, its content must be stored in User Memory if it is to be reused. Furthermore, whenever a new

Performance is selected, the entire content of the Edit Buffer will be overwritten with its data. It is important, therefore, that

any Performance in the Edit Buffer be stored as soon as you are happy with it.



Performances

Left and right part data

Voice settings

Pre-amplifier settings

Modulation effect settings

Power amplifier / compressor

settings (CP5 only)

TRACK part data

MIC INPUT part data (CP5 only)

Reverb settings

Common Settings data

Song Setting Area data

System Settings

Utility data

Master Compressor data

Master Equalizer data

Transpose data

Edit Buffer

(DRAM)

System Settings

Utility data

Master Compressor data

Master Equalizer data

Transpose data

User Memory

Performances

Left and right part data

Voice settings

Pre-amplifier settings

Modulation effect settings

Power amplifier / compressor

settings (CP5 only)

TRACK part data

MIC INPUT part data (CP5 only)

Reverb settings

Common Settings data

Song Setting Area data

User Songs

Preset Data (ROM)

Preset Performances

Voice settings

Preset Drum Patterns

Demo songs

Load

Store

Bulk dump

Internal data transfer

Exchange of data with

external devices

External Performance memory

USB flash-memory

device

EXTBANK.C5E or EXTBANK.C6E

File extension: .C5A or .C6A

File extension: .MID

*1: The Bulk Dump function can be used only with data currently being edited in the Edit Buffer.

*2: User Performance memory banks reside in the instrument's flash ROM; External Performance memories are loaded into the internal DRAM.

*3: Both User Performance memories and External Performance memories are displayed here in the form of a single block.

MIDI device

or computer

Sequencing software

Internal memory

Wave files

File load and save

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP5 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info