Bedienungsanleitung Yamaha CS1X (Seite 54 von 64) (Englisch)

48730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

MIDI Messages Transmitted/Received by the CS1x

MIDI messages can be divided into two groups: Channel messages and

System messages. Below is an explanation of the various types of MIDI

messages which the CS1x can receive/transmit.

1. CHANNEL MESSAGES

Channel messages are the data related to the performance on the

keyboard for the specific channel.

1.1 Note On/Note Off (Key On/Key Off)

Messages which are generated when the keyboard is played.

Reception note range = C-2 (0) - G8 (127), C3 = 60

Velocity range = 1 - 127 (Only the Note On velocity is received)

Note On: Generated when a key is pressed.

Note Off: Generated when a key is released.

Each message includes a specific note number which corresponds to the

key which is pressed, plus a velocity value based on how hard the key is

struck.

1.2 Control Change

Control Change messages let you select a voice bank, control volume,

panning, modulation, portamento time, brightness and various other

controller parameters, through specific Control Change numbers which

correspond to each of the various parameters.

1.2.1 Bank Select MSB (Control #000)

Bank Select LSB (Control #032)

Messages which select variation voice bank numbers by combining

and sending the MSB and LSB from an external device.

MSB and LSB functions differently depending on the tone generator

mode.

In XG mode, MSB numbers select voice type (Normal Voice or Drum

Voice), and LSB numbers select voice banks.

In TG300B mode, LSB is fixed, and MSB numbers select voice banks.

(For more information about Banks and Programs, see Voice List in

the "Data List" book.)

A new bank selection will not become effective until the next

Program Change message is received.

1.2.2 Modulation (Control #001)

Messages which control vibrato depth using the Modulation Wheel.

Setting the value to 127 produces maximum vibrato and 0 results in

vibrato off.

1.2.3 Portamento Time (Control #005)

Messages which control the duration of portamento, or a continuous

pitch glide between successively played notes.

When the parameter 1.2.10 Portamento Switch is set to on, the value

set here can adjust the speed of pitch change.

Setting the value to 127 produces maximum portamento time and 0

results in minimum portamento time.

1.2.4 Data Entry MSB (Control #006)

Data Entry LSB (Control #038)

Messages which set the value for the parameter specified by

1.2.23RPN MSB/LSB and 1.2.22 NRPN MSB/LSB.

Parameter value is determined by combining MSB and LSB.

1.2.5 Main Volume (Control #007)

Messages which control the volume of each Part.

Setting the value to 127 produces maximum volume and 0 results in

volume off.

The messages 007 (Main Volume) or 011 (Expression) will be

transmitted using an optional controller connected to the FOOT

VOLUME jack on the rear panel if an appropriate setting is selected in

the Assign Control Number section in Utility mode.

1.2.6 Pan (Control #010)

Messages which control the stereo panning position of each Part (for

stereo output).

Setting the value to 127 positions the sound to the far right and 0

positions the sound to the far left.

1.2.7 Expression (Control #011)

Messages which control intonation expression of each Part during

performance.

Setting the value to 127 produces maximum volume and 0 results in

volume off.

The messeges 007 (Main Volume) or 011 (Expression) will be

transmitted using an optional controller connected to the FOOT

VOLUME jack on the rear panel if an appropriate setting is selected in

the Assign Control Number section in Utility mode.

MIDI is an acronym that stands for Musical Instrument Digital Interface, which allows electronic musical instruments to

communicate with each other, by sending and receiving compatible Note, Control Change, Program Change and

various other types of MIDI data, or messages.

The CS1x can control a MIDI device by transmitting note related data and various types of controller data. The CS1x can

be controlled by the incoming MIDI messages which automatically determine tone generator mode, select MIDI

channels, voices and effects, change parameter values, and of course play the voices specified for the various Parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS1X Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info