Bedienungsanleitung Yamaha CS1X (Seite 56 von 64) (Englisch)

48730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

1.2.23 RPN (Registered Parameter Number)LSB

(Control #100)

RPN (Registered Parameter Number)MSB

(Control #101)

Messages which offset, or add or subtract values from a Part's pitch

bend sensitivity, tuning, or other parameter settings.

First send the RPN MSB and RPN LSB to specify the parameter which

is to be controlled. Then use 1.2.21 Data Increment/Decrement to set

the value of the specified parameter.

Note that once the RPN has been set for a channel, subsequent data

entry will be recognized as the same RPN's value change. Therefore

after you use the RPN, you should set a Null (7FH, 7FH) value to avoid

an unexpected result.

The following RPN numbers can be received.

1.2.24 Channel Mode Messages

The following Channel Mode Messages can be received.

1.2.24.1 All Sounds Off (Control #120)

Clears all sounds currently sounding on the specified channel.

However, the status of channel messages such as Note On and Hold

On is maintained.

2nd BYTE 3rd BYTE MESSAGE

120 0 All Sounds Off

121 0 Reset All Controllers

123 0 All Notes Off

126 0 ~ 16 Mono

127 0 Poly

RPN MSB RPN LSB PARAMETER

00 00 Pitch Bend Sensitivity

00 01 Fine Tune

00 02 Coarse Tune

7F 7F Null

NRPN MSB NRPN LSB PARAMETER

01 08 Vibrato Rate

01 09 Vibrato Depth

01 0A Vibrato Delay

01 20 Filter Cutoff Frequency

01 21 Filter Resonance

01 63 EG Attack Time

01 64 EG Decay Time

01 66 EG Release Time

14 rr Drum Filter Cutoff Frequency

15 rr Drum Filter Resonance

16 rr Drum EG Attack Rate

17 rr Drum EG Decay Rate

18 rr Drum Pitch Coarse

19 rr Drum Pitch Fine

1A rr Drum Level

1C rr Drum Pan

1D rr Drum Reverb Send Level

1E rr Drum Chorus Send Level

1F rr Drum Variation Send Level

*rr = Note number for each drum voice instrument.

1.2.24.2 Reset All Controllers (Control #121)

The values of the following controllers will be reset to the defaults.

1.2.24.3 All Notes Off (Control #123)

Clears all notes currently on for the specified channel.

However, if Hold1 or Sostenuto is on, notes will continue sounding

until these are turned off.

1.2.24.4 Mono (Control #126)

Performs the same function as when an All Sounds Off message is

received, and if the 3rd byte (mono number) is in the range of 0 - 16,

sets the corresponding channel to Mono Mode (Mode 4 : m = 1).

1.2.24.5 Poly (Control #127)

Performs the same function as when an All Sounds Off message is

received, and sets the corresponding channel to Poly Mode (Mode 3).

1.3 Program Change

Messages which determine which voice to select for each Part.

With a combination of Bank Select, you can select not only basic

voice numbers, but also variation voice bank numbers.

1.4 Channel Aftertouch

Messages which let you control the sounds by the pressure you

apply to the keys after the initial striking of the keys, over the entire

channel.

1.5 Polyphonic Key Pressure

Messages which let you control the sounds by the pressure you

apply to the keys after the initial striking of the keys, for each

individual key.

1.6 Pitch Bend

Pitch Bend messages are continuous controller messages that allow

the pitch of designated notes to be raised or lowered by a specified

amount over a specified duration.

CONTROLLER VALUE

Pitch Bend Change 0 (center)

Aftertouch 0 (off)

Modulation 0 (off)

Foot Controller 0 (min)

Expression 127 (max)

Hold1 0 (off)

Portamento 0 (off)*

Sostenuto 0 (off)

Soft Pedal 0 (off)

Portamento Control Cancels the Portamento source key number

RPN Number not specified; internal data will not change

NRPN

* In Performance mode, 1 (on).

Number not specified; internal data will not change

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS1X Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info