Bedienungsanleitung Yamaha CS6R (Seite 110 von 196) (Englisch)

48734

110

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

110

Voice Mode

Plug-in Common Controller

You can set Pitch Bend Wheel, Modulation Wheel and

other Controller parameters for the Plug-in Voices in

the following nine screens.

CTL Pitch (Pitch Bend)

CTL Set1 (Control Set 1)

CTL Set2 (Control Set 2)

CTL MW Control (MW Control Depth)

CTL MW Modulation (MW Modulation Depth)

CTL AT Control (AT Control Depth)

CTL AT Modulation (AT Modulation Depth)

CTL AC Control (AC Control Depth)

CTL AC Modulation (AC Modulation Depth)

CTL Pitch (Pitch Bend)

You can set the Pitch Bend Range and Portamento for

the Plug-in Voice here. Portamento creates a smooth

transition from the pitch of the first note played to the

pitch of the next.

■ Pitch Bend

Set the amount (in semitones) by which the pitch of

the note is varied when you move the Pitch Bend

Wheel up/down. For example, if you set a value of

+12, the pitch will change up by up to an octave

when you move the wheel up. Conversely, if you set a

negative value, the pitch falls when you move the

wheel down.

❏ Settings: -24 ~ 0 ~ +24

■ Portamento

Switch Portamento on or off. You can also set this

parameter using the PORTAMENTO [ON/OFF] key

on the front panel of the CS6x.

❏ Settings: off, on

■ Time

Set the Portamento Time, which is the speed of the

transition in pitch from the first note to the next.

You can also set this parameter using the

[PORTAMENTO] knob on the front panel of the

CS6x.

❏ Settings: 0 ~ 127

CTL Set1 (Control Set 1)

CTL Set2 (Control Set 2)

These parameters are the same as for Normal Voices.

Details are given on Page 84 (The Elem SW parameter

is only available for Normal Voices).

CTLíPitch) Pitch Bend Portamento Time

Common -24 on 127

CTL MW Control (MW Control Depth)

Here, you can set the depth of control the Modulation

Wheel has over the filter.

■ Filter

Set the depth of control of the Modulation Wheel

over the filter cutoff frequency.

❏ Settings: -64 ~ 0 ~ +63

CTL MW Modulation

(MW Modulation Depth)

Here, you can set the depth of control the Modulation

Wheel has over the pitch, filter and amplitude

modulation of the Plug-in Voice.

■ PMod (Pitch Modulation Depth)

Set the depth of control the Modulation Wheel has

over the pitch modulation. The larger the setting,

the greater the depth of control.

❏ Settings: 0 ~ 127

■ FMod (Filter Modulation Depth)

Set the depth of control the Modulation Wheel has

over the filter cutoff modulation. The larger the

setting, the greater the depth of control.

❏ Settings: 0 ~ 127

■ AMod (Amplitude Modulation Depth)

Set the depth of control the Modulation Wheel has

over the amplitude modulation. The larger the

setting, the greater the depth of control.

❏ Settings: 0 ~ 127

CTL AT Control (AT Control Depth)

Here, you can set the depth of control keyboard

aftertouch has over the pitch and filter of the Plug-in

Voice.

■ Pitch

Set the depth of control of keyboard aftertouch over

the pitch. You can set a value (in semitones) of up

to two octaves.

❏ Settings: -24 ~ 0 ~ +24

■ Filter

Set the depth of control of keyboard aftertouch over

the filter cutoff frequency.

❏ Settings: -64 ~ 0 ~ +63

CTLíAT Control) Pitch Filter

Common +24 -64

CTLíMW Modulation) PMod FMod AMod

Common 127 127 127

CTLíMW Control) Filter

Common -64

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info