Bedienungsanleitung Yamaha CS6R (Seite 112 von 196) (Englisch)

48734

112

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

112

Voice Mode

OSC Assign (Oscillator Assign)

You can select the Board Voice that make up the

Element in a Plug-in Voice. Use Knob [C] to select the

Bank and Knob [1] to select the Board Voice.

■ Bank

Select the Board Voice Bank of the Plug-in Voice.

❏ Settings: (Depends on the Plug-in Board. Refer to the

Owner’s Manual for your Plug-in Board.)

■ Number

Select the Board Voice Number. The Board Voice

Name is displayed to the right of this number.

❏ Settings: (Depends on the Plug-in Board. Refer to the

Owner’s Manual for your Plug-in Board.)

OSC Velocity (Oscillator Velocity)

Here, you can set the velocity and note shift for the

Board Voice.

■ Depth

Set the velocity sensitivity of the Board Voice. If you

set a larger value, the volume increase will be greater

the harder you play the keyboard.

❏ Settings: 0 ~ 127

■ Offset

Set an offset value for the velocity sensitivity of the

Board Voice. When you press a note on the keyboard,

this offset value is added to the note velocity.

❏ Settings: 0 ~ 127

■ NoteSft (Note Shift)

Set the amount (in semitones) by which the pitch of

the Board Voice is shifted. You can set a value of up

to 2 octaves.

❏ Settings: -24 ~ 0 ~ +24

Plug-in Element Pitch

You can set the Pitch Envelope Generator parameters

for the Board Voice. The Pitch Envelope Generator

controls the change in pitch from the moment a note is

pressed on the keyboard to the moment it is released.

OSCíVelocity) Depth Offset NoteSft

Elem 127 0 -24

OSCíAssign) Bank Number 

Elem NORM/001 128[GndPiano]

■ Delay

Set the delay time between the moment you press a

note on the keyboard and the moment the LFO

comes into effect. As shown in the illustration, a

positive setting will lengthen the delay and a

negative setting will shorten it.

❏ Settings: -64 ~ 0 ~ +63

Short Delay

Long Delay

■ PMod (Pitch Modulation Depth)

Set the amount by which the LFO waveform controls

the pitch. A positive setting will increase the

amount and a negative value will decrease it.

❏ Settings: -64 ~ 0 ~ +63

Plug-in Common Effect

In the following three screens, you can set the

parameters for the Insertion and System Effects used

by the Plug-in Voice. The parameters are the same as

for Normal Voices. The EFF EF1 (Insertion Effect)

parameter is the same as the EFF EF1 (Insertion Effect

1) parameter of the Normal Voices. Details are given

on Page 88.

EFF EF1 (Insertion Effect)

EFF Rev (Reverb)

EFF Cho (Chorus)

Plug-in Element OSC (Oscillator)

Here, you can set the Element-related parameters for

the Plug-in Voice. In the following two screens, you

can select the Element’s waveform, then it’s velocity

parameters.

OSC Assign (Oscillator Assign)

OSC Velocity (Oscillator Velocity)

Key on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info