Bedienungsanleitung Yamaha CS6R (Seite 131 von 196) (Englisch)

48734

131

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

131

Performance Mode

■ Reso (Resonance)

Set the amount of Resonance (harmonic emphasis)

applied to the signal at the Cutoff frequency. This

adds further character to the sound.

❏ Settings: -64 ~ 0 ~ +63

TON EG (Tone Envelope Generator)

You can set EG (Envelope Generator) parameters for

each Part. There are four parameters governing the

transition in output level from the moment a note is

pressed on the keyboard to the moment it is released or

the point at which the output level has faded to zero.

This screen is not available for the A/D Input Part.

For more information, refer to a diagram that illustrate the

concept of Envelope Generator, which you can find in Voice

or Phrase Clip Edit Mode sections.

Part 1 to 16

Plug-in 1/2 Part

Multi Plug-in Part

Phrase Clip Part

Drum Voice Part

■ Attack

Set the transition time from the moment a key on

the keyboard is pressed to the point at which the

output level of the Part reaches its peak. A positive

value will lengthen the transition time and a

negative value will shorten it.

❏ Settings: -64 ~ 0 ~ +63

■ Decay

Set the transition time from the point at which the

output level of the Part reaches its peak to the point at

which it levels off. A positive value will lengthen the

transition time and a negative value will shorten it.

❏ Settings: -64 ~ 0~ +63

■ Sustain

Set the output level of the Part maintained while the

key on the keyboard is being held down.

This parameter is not available for Plug-in, Phrase Clip

or Drum Voice Parts.

❏ Settings: -64 ~ 0 ~ +63

TONíEG) Attack Decay 

PartCL + 0 + 0

TONíEG) Attack Decay Release

PartP1 + 0 + 0 + 0

TONíEG) Attack Decay Sustain Release

Part01 + 0 + 0 + 0 + 0

■ Release

Set the transition time from the point at which the

note on the keyboard is released to the point at

which the output level of the Part reaches zero. A

positive value will lengthen the transition time and a

negative value will shorten it.

This parameter is not available for Phrase Clip or Drum

Voice Parts.

❏ Settings: -64 ~ 0 ~ +63

TON Portamento (Tone Portamento)

You can set the following three Portamento parameters

for each Part.

This screen is not available for A/D Input, Phrase Clip or

Drum Voice Parts.

Part 1 to 16

Plug-in 1/2 Part

Multi Plug-in Part

■ Switch (Portamento switch)

Switch Portamento on or off. With Portamento

switched on, there will be a smooth transition in

pitch from the first note played to the next note.

❏ Settings: off, on

■ Time (Portamento Time)

Set the pitch transition time. Higher values mean

longer transition times.

❏ Settings: 0 ~ 127

■ Mode (Portamento Mode)

Select the Portamento Mode. The Portamento Mode

behavior varies according to the Part Mode (mono/poly)

setting in the LYR Mode screen (Page 133).

This parameter is not available for Plug-in 1/2 and

Multi Plug-in Parts.

❏ Settings: fingered, fulltime

If Part Mode is set to “mono”:

fingered:

Portamento is applied when the keyboard is played legato (a

note is played before the previous note is released).

full:

Portamento is applied for all playing styles.

If Part Mode is set to “poly”:

Portamento is applied to multiple notes.

TONíPortamento) Switch Time 

Part17 on 127

TONíPortamento) Switch Time Mode

Part01 on 127 fulltime

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info