Bedienungsanleitung Yamaha CS6R (Seite 145 von 196) (Englisch)

48734

145

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

145

Phrase Clip Mode

5Now follow the procedure according to the setting

made in step 3.

If set to “manual”:

Recording will begin when you press the [ENTER] key.

If set to “level”:

Press the [ENTER] key to enter Recording Standby state.

You will see the “Waiting for trigger” message displayed.

When the level of the input signal reaches or passes

the Trigger Level, recording begins automatically.

While recording, you will see the “Now recording...”

message displayed.

6Press the [EXIT] key to stop recording. The “Now

recording...” message will disappear.

If the memory becomes full, recording will

automatically stop, even before you press the [EXIT]

key.

7You can now audition the Clip just recorded by

pressing the Clip Key selected in step 2 while

holding the [REC] key.

8If you are not satisfied with the result, you can re-record

the Phrase Clip by pressing the [ENTER] key again.

9When you exit Phrase Clip Record Mode, the Phrase

Clip you have recorded will automatically be

assigned a new Clip Number and Clip Name, and

saved to memory (DRAM) along with the Clip Key

setting assigned in step 2.

)Repeat steps 1 to 9 to record new Phrase Clips.

Phrase Clip data held in memory (DRAM) will be lost if

you switch off your synthesizer. You should always save

important Phrase Clip data to Memory Card (Page 173).

A recorded Clip can be edited in its tones, applied

effects, assigned to a Clip Key from a Clip Kit in Phrase

Clip Edit Mode. It can also be copied or even deleted in

Phrase Clip Job Mode. The Clip Kit that includes the

recorded Clip will be selected (from four Clip Kits) and

assigned to the Phrase Clip Part in Performance Edit

Mode (Page 121).

Example 2: Recording a Phrase Clip

from the Internal Tone Generator

You can record a Voice, Performance, an existing Phrase

Clip or a Song as a new Phrase Clip.

1Select a Voice, Performance or Clip Kit in Voice Play

Mode, Performance Play Mode or Phrase Clip Play

Mode. If you wish to record a phrase of a Song, you

will need to prepare the Song file for playback and

select the appropriate Performance.

For a possibly best sound quality, you should maximize

the volume of the Voice, Performance or Phrase Clip that

you are recording.

PCLP Rec) Source Trigger-level [EXIT]

<< Waiting for trigger... >> toStop

PCLP Rec) Source Trigger [EXIT]

<< Now recording... >> toStop

2While still holding down the [REC] key, use Knob

[C] or press a note on the keyboard to set the Clip

Key. When you release the [REC] key, you will see

the Recording screen.

3Select a recording source by specifying the value

(pclip, voice, or perform) for the Source parameter in

the Recording screen. Also select a method to start

recording in the Trigger parameter — “key” for

recording a Voice or Performance played by the

keyboard or “manual” for a specific phrase or

melody during playback of a song.

The recorded clip will automatically be assigned a vacant

Clip Number in memory (DRAM). Therefore, you will

not have to choose a Clip Number before recording.

4Press the [ENTER] key to enter Recording Standby

state. You will see the “Waiting for trigger” message

displayed.

5Now follow the procedure according to the setting

made in step 3.

If set to “key”:

Start playback of the song by pressing the SEQ PLAY

[START/STOP] key.

If set to “manual”:

Start playback of the song by pressing the SEQ PLAY

[START/STOP] key. Start recording of a Phrase Clip

at any necessary moment by pressing the [ENTER]

key.

While recording, you will see the “Now recording...”

message displayed.

6Press the [EXIT] key to stop recording. The “Now

Recording...” message will disappear.

If the memory becomes full, recording will automatically

stop, even before you press the [EXIT] key.

7You can now audition the Clip just recorded by

pressing the Clip Key selected in step 2 while

holding the [REC] key.

8If you are not satisfied with the result, you can re-record

the Phrase Clip by pressing the [ENTER] key again.

9When you exit Phrase Clip Record Mode, the Phrase

Clip you have recorded will automatically be

assigned a new Clip Number and Clip Name, and

saved to memory (DRAM) along with the Clip Key

setting assigned in step 2.

)Repeat steps 1 to 9 to record new Phrase Clips.

Phrase Clip and Clip Kit data held in memory (DRAM)

will be lost if you switch off your synthesizer. You should

always save important Phrase Clip and Clip Kit data to

Memory Card (Page 173).

After recording from the internal tone generator, the

recorded Phrase Clip will automatically be normalized

(Ratio = 100 %). For more information about

normalization, refer to Page 157.

A recorded Clip can be edited in its tones, applied effects,

assigned to a Clip Key from a Clip Kit in Phrase Clip Edit

Mode. It can also be copied or even deleted in Phrase Clip

Job Mode. The Clip Kit that includes the recorded Clip

will be selected (from four Clip Kits) and assigned to the

Phrase Clip Part in Performance Edit Mode (Page 121).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 145

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info