Bedienungsanleitung Yamaha CS6R (Seite 147 von 196) (Englisch)

48734

147

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

147

Phrase Clip Mode

Menu Display

You will see the following if you use the [PAGE]

knob while holding down the [SHIFT] key. Use the

[PAGE] knob to move the cursor to the parameter

you wish to edit, then release the [SHIFT] key to

jump to the screen you were previously at.

For CS6x, you can directly make access to a specific

Menu screen using a PROGRAM/PART key (Page 80).

The í Indicator

If you alter any parameters in Phrase Clip Edit Mode,

the í indicator will be displayed at the top left of the

screen. This gives a quick indication that the current

Clip Kit has been modified but not yet stored.

Even if you exit to Phrase Clip Play Mode, the edited

settings for the current Clip Kit will not be lost so

long as you do not select another Clip Kit.

The í indicator will also be displayed in Phrase Clip

Play Mode.

The “Compare” Function

Use this to listen to the difference between the Phrase

Clip with your edited settings and the Phrase Clip

prior to editing.

1 Press the [COMPARE (EDIT)] key while in Phrase

Clip Edit Mode. The í indicator at the top left of

the screen will change to the î indicator and the

Phrase Clip settings prior to editing will temporarily

be reinstated for comparison purposes.

While the “Compare” function is enabled, editing will

not be possible using Knobs [A] to [C] or Knob [1]/[2].

2 Press the [EDIT] key again to disable the

“Compare” function and restore the settings for

your edited Phrase Clip.

GENîName) Ctgry

Compare indicator

GEN Name) Ctgry

“Edit” indicator

OSC Out) Com:>GEN≥QED>ARP>CTL> >EFF

Key=C 3 Key:>OSC>PCH>FLT>AMP> >EQ

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

Cursor

Clip Common General

GEN Name (General Name)

You can set a Clip Kit Name consisting of up to 10

characters. You can also select the Category Name to

the left of the Clip Kit Name.

The Clip Kit Name is set in the same way as the Voice

Name. Details are given on Page 80.

Clip Common Quick Edit

Various parameters control the sonic properties of the

Clip Kit, and many can be edited using the Sound

Control knobs on the front panel of the CS6x. There

are four screens.

QED Level (Quick Edit Level)

QED EffectCtrl (Quick Edit Effect)

QED Filter (Quick Edit Filter)

QED EG (Quick Edit Envelope Generator)

In Performance Mode, the Phrase Clip Part settings are used.

QED Level (Quick Edit Level)

These parameters control the output level and pan

position of the Clip Kit.

■ Vol (Volume)

Set the output level of the Clip Kit.

❏ Settings: 0 ~ 127

■ Pan

Set the stereo pan position of the Clip Kit. You can

also adjust this parameter using the [PAN] knob on

the front panel of the CS6x.

❏ Settings: L63 (Left) ~ C (Center) ~ R63 (Right)

■ RevSend (Reverb Send)

Set the Send level of the signal sent from Insertion

Effect 1/2 (or the bypassed signal) to the Reverb effect.

You can also adjust this parameter using the [REVERB]

knob on the front panel of the CS6x.

❏ Settings: 0 ~ 127

QEDíLevel) Vol Pan RevSend ChoSend

Common 127 C 127 127

GENíName) Ctgry a-Z 0-? Cursor

Common [Pf:Init Voice]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info