Bedienungsanleitung Yamaha CS6R (Seite 159 von 196) (Englisch)

48734

159

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

159

Phrase Clip Mode

PCLP Copy

You can copy the data of each Phrase Clip to another

Phrase Clip.

To select each Phrase Clip, use Knob [A] to select Clip

Key or Knob [B] to select the Phrase Clip Number.

After selecting the Phrase Clip, press the [ENTER] key

to copy it to an automatically allocated (vacant) Phrase

Clip Number.

You can also select the Clip Key directly by pressing a note

on the keyboard.

■ Clip Key

Select the Clip Key of the Phrase Clip to be copied.

❏ Settings: C0 ~ C6

■ Clip Number

Select the Phrase Clip to be copied.

❏ Settings: 1 ~ 256

PCLP SampleRcv (Sample Receive)

You can receive Phrase Clip (sample) data from

external MIDI devices, such as samplers and

computers, using the MIDI Sample Dump Standard.

The Device Number must be set correctly in order to

perform this operation. Details are given on Page 166.

Select the sample you wish to receive, select the Clip

Key to which it will be assigned, then press the

[ENTER] key to start the Sample Receive process. The

received sample will be assigned to the specified Clip

Key of the current Clip Kit.

■ ReqSmpl (Request Sample)

Set the sample data to be received from an external

MIDI device.

❏ Settings: 1 ~ 16384

This setting is not necessary when you directly send

sample data from an external MIDI device to the

instrument (without requesting it using this parameter).

You can only receive mono samples recorded at 44.1

kHz in 16-bit (linear) format.

■ Key (Clip Key)

Select the Clip Key to which the sample will be

assigned.

❏ Settings: C0 ~ C6

PCLP SampleRcv) ReqSmpl > Key[InitSmpl]

Job 16383 C 3:001

PCLP Copy)

Job C 2:001[SmplName] > 050[NewSampl]

PCLP AutoKeyMap

Auto Key Map is used to automatically assign

Variations of a Phrase Clip to notes on the keyboard,

starting at the Clip Key note.

To select the Phrase Clip of the Variations, use Knob

[A] to select the Clip Key or Knob [B] to select the

Phrase Clip Number.

After selecting the Phrase Clip, set the Clip Key and

Type parameters, then press the [ENTER] key to

execute the Auto Key Map operation.

You can also select the Clip Key directly by pressing a note

on the keyboard.

■ Clip Key

Set the Clip Key assigned to the Phrase Clip of the

source Variation.

❏ Settings: C0 ~ C6

■ Clip Number

Set the Phrase Clip of the source Variation.

❏ Settings: 1 ~ 256

■ Key

Set the first Clip Key to be assigned. Assignments

will be made from this note upwards when you

perform the Auto Key Map operation.

❏ Settings: C0 ~ C6

■ Type

Set the Type. If you select “white,” the assignments

will be applied only to white notes upwards from the

note set in the “Key” parameter. If you select “all,”

the assignments will be applied to both black and

white notes upwards from that point.

❏ Settings: white, all

PCLP Kit Key Copy

You can copy Clip key data from one Clip key to

another.

After selecting the source and destination Clip key,

press the [ENTER] key.

■ Source Clip Key

Select the Clip Key to be copied.

❏ Settings: C0 ~ C6

PCLP Kit Key Copy)

Job C 3 > B 3

PCLP AutoKeyMap) Key Type

Job C 2:001[SmplName] C 3 white

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info