Bedienungsanleitung Yamaha CS6X (Seite 169 von 196) (Englisch)

48732

169

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

169

Utility Mode

Details about Controller Assign settings in Performance

mode are given on Page 126.

CTRL Assign1 (Controller Assign 1)

Use Knobs [C], [1] and [2] to assign Control Change

Numbers to the Breath Controller, Knob [1] and Knob

[2], respectively. The selected Control Change Name is

shown on the left of the display.

■ BC (Breath Controller)

Assign Control Change Number to the Breath

Controller. The Breath Controller is connected to

the BREATH connector (Page 18) on the rear panel.

When the Breath Controller is used, this Control

Change Number is transmitted. Also, if this Control

Change Number is received, the destination

parameter of the Breath Controller is controlled.

❏ Settings: 00 ~ 95 (see the separate Data List for details)

■ Knob1/2 (Knob [1]/[2])

Assign Control Change Numbers to Knobs [1] and

[2] on the front panel.

❏ Settings: 00 ~ 95 (see the separate Data List for details)

CTRL Assign2 (Controller Assign 2)

Use Knobs [C] and [1] to assign Control Change

Numbers to the Foot Controller and Ribbon Controller,

respectively. The selected function is shown on the left

of the display. Use Knob [2] to select the Ribbon

Controller Mode.

■ FC (Foot Controller)

Assign a Control Change Number to the Foot Controller.

The Foot Controller is connected to the FOOT

CONTROLLER connector on the rear panel (Page 18).

❏ Settings: 00 ~ 95 (see the separate Data List for details)

CTRL Assign2) FC RB----Mode

Vce [--------] 04 22 reset

Control Change

Number

ModeControl Change Name

CTRL Assign1) BC Knob1 Knob2

Vce [FootCtrl] 02 16 17

Control

Change Number

Control Change Name

■ RB (Ribbon Controller)

Assign a Control Change Number to the Ribbon

Controller on the front panel. The Ribbon Controller’s

behavior depends on the Mode parameter setting.

❏ Settings: 00 ~ 95 (see the separate Data List for details)

Details about the Ribbon Controller are given on Page

48.

■ Mode (CS6x only)

Set the behavior of the Ribbon Controller. If you select

“hold,” the parameter controlled by the Ribbon

Controller will hold its value even after you release it.

If you select “reset,” the value returns to its default

setting at the center of the Ribbon Controller strip.

❏ Settings: hold, reset

PLG (Plug-in) (if a Plug-in Board has been installed)

If you have a Plug-in Board installed, the following three

screens are available for setting its parameters.

However, the number of sub-screens and parameters will

vary depending on the type of Plug-in Board installed.

PLG Status (Plug-in Status)

PLG1/2 MIDI (Plug-in 1/2 MIDI)

PLG1/2 System (Plug-in 1/2 System)

PLG Status (Plug-in Status)

The name of the Plug-in Board is displayed.

■ PLG1 (Plug-in 1)

The name of the Plug-in Board in the Plug-in 1 slot

is displayed.

■ PLG2 (Plug-in 2)

The name of the Plug-in Board in the Plug-in 2 slot

is displayed.

Nothing is displayed for vacant Plug-in slots.

■ Expand

This parameter is accessible only when you have two

identical Plug-in boards installed on the instrument.

The “part” setting enables two boards to work

separately (you can select them in two different

Parts). The “poly” setting enables two boards to work

together to double polyphonic notes (you can only use

them in a single Part with double polyphony).

❏ Settings: part, poly

PLG1 MIDI (Plug-in 1 MIDI)

PLG2 MIDI (Plug-in 2 MIDI)

Set the MIDI parameters of the Plug-in Board.

PLG2 MIDI) Clock DevNo

PLG150-AN on all

PLG Status) PLG1:PLG100-VH Expand

Plugin PLG2:PLG150-AN ----

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6X Seite 169

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info