Bedienungsanleitung Yamaha CVP-83S (Seite 38 von 76) (Englisch)

599147

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Performance Memory

■ Adding New Tracks

When you’ve finished recording the first track, you can simply play it back as described in the previous section or

add a new track to your song. To record a new track:

ZSelect a Voice .........................................................................................................................................

Select a voice and other parameters for the new track. Try out the voice and selected

parameters before proceeding.

XEngage the Record Ready Mode...........................................................................................................

REC

Press the [REC] button to engage the record ready mode.

● Monitoring Previously Recorded Tracks

All previously recorded tracks are automatically selected for playback when the

record mode is engaged. You can turn these tracks on or off as required by pressing

the corresponding track button(s) before pressing the [REC] button.

CSelect a Track .........................................................................................................................................

BStop Recording.......................................................................................................................................

Press the [START/STOP] button or the [REC] button to stop recording.

● Changing the Initial Parameter Values

The initial values of parameters marked with asterisks (*) in the lists given in step N

on page 33 can be changed for each track or the entire song by engaging the record

mode for the desired track, changing the parameters as required, and then disengaging

the record mode (press the [REC] button again) without actually recording. To cancel

any initial parameter values you’ve made, select a different track and then press the

[REC] button to disengage the record mode.

To change individual ABC part volume settings engage any ABC mode after turning

[REC] on, set the RHYTHM, CHORD 1, CHORD 2, and/or BASS volume control

as required, then disengage the record mode.

The BASS volume control can be used while holding the [MIDI/TRANSPOSE]

button to independently adjust the volume of each track (except the rhythm track).

The volume of the rhythm track is adjusted via the RHYTHM volume control. Please

note that volume settings can only be decreased.

Individual track reverb depth can be adjusted by using the BASS volume while hold-

ing the [REVERB] button, and the overall reverb depth can be adjusted by using the

TEMPO [▲] and [▼] buttons while holding the [REVERB] button.

Also note that the tempo, reverb type, style, style variation, fill-in, and intro/ending

settings are common to all tracks and cannot be set independently for different tracks.

● Erasing the Tracks

Individual tracks — except the rhythm track — can be completely erased by starting

and stopping recording without actually playing or changing any parameters (i.e.

press the [START/STOP] button twice). The same procedure can be used to erase the

rhythm track if the RHYTHM volume control is set to its minimum position.

NOTES

• Tracks 3-10 can be erased by engaging the record mode, turning ABC on, and then

pressing the [START/STOP] button twice.

● Recording Without a Disk

The Clavinova has enough internal RAM memory to allow recording for a while even

if a disk is not loaded (up to approximately 1,600 notes if no other data is recorded).

If you accidentally record without loading a disk, make sure you use the COPY func-

tion (described on page 39) to copy the recorded data to disk if you want to keep the

recorded data (the internal RAM memory is not backed up). This is necessary

because the internal RAM memory is cleared automatically when a Disk Orchestra

Collection, Disklavier PianoSoft, or Style Disk is loaded, or a performance disk is

loaded and the [SONG SELECT] button is pressed.

Select a track other than the one you used to record the previous track. The indicator

of the track selected for recording should glow red.

NOTES

• Remember that if you record on a track that has already been recorded, the previous

material will be erased and the new material will be recorded in its place.

Play on the keyboard or press the [START/STOP] button to start recording.

VStart Recording.......................................................................................................................................

BASS

MIN MAX

MIDI/

TRANSPOSE

Volume of each track

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-83S Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-83S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info