Bedienungsanleitung Yamaha CVP-83S (Seite 40 von 76) (Englisch)

599147

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Performance Memory

Original Performance Memory recordings can be played back and controlled in

the same way as described in the Disk Orchestra section, beginning on page 26.

You can individually select tracks to play back (page 27), use the guide function

(and the keyboard guide lamps on the CVP-87A) with the data recorded on tracks 1

and 2 (page 28), and use the A-B repeat function (page 29).

NOTES

• The playback voice cannot be changed when playing back Performance Memory

data (the voice played via the keyboard can be changed).

■ Playback

● Volume Control

The RHYTHM, CHORD 1, CHORD 2, and BASS volume controls can be

used to adjust the volume of the corresponding accompaniment parts when

playing back data that was recorded with ABC.

When playing back data that was recorded without ABC, however, these

volume controls have the following track assignments.

RHYTHM: RHYTHM track

CHORD 1: 4 - 10 tracks

CHORD 2: 1 & 2 tracks

BASS: 3 track

ZMake the Required MIDI Connections

Connect the MIDI OUT terminal of the trans-

mitting device to the Clavinova’s MIDI IN terminal

using a standard MIDI cable.

XSelect the External Clock Mode

To select the external clock mode press the

[ORGAN] VOICE button while holding the [MIDI/

TRANSPOSE] button. When selected, the [OR-

GAN] indicator will light while the [MIDI/TRANS-

POSE] button is pressed. In this mode the Clavinova

is controlled by an external MIDI clock signal.

CSelect a Song Number

Select the song number to which you want to

record the data by using the SONG NUMBER [▲]

and [▼] buttons (of course, a properly formatted

floppy disk must already be loaded in the disk

drive).

VEngage the MIDI Record Ready Mode

Press the [REC] button while holding the

[MIDI/TRANSPOSE] button to engage the MIDI

record ready mode. In this mode all tracks (1

through 15) can be recorded at the same time via the

Data from an external MIDI device such as a sequencer or music computer can also be recorded to the Performance

Memory as follows:

● Multi-timbre Recording via MIDI

correspondingly numbered MIDI channels. That is,

MIDI data received on channel 1 will be recorded on

track 1, data received via channel 2 will be recorded

on track 2, etc.

BMatch the Time Signature & Tempo

Select a style having a time signature that

matches that of the data you are going to record (e.g.

4/4, 3/4), and match the Clavinova tempo setting to

that of the data to be recorded.

NRecord the MIDI Data

Play back the MIDI data on the sequencer,

music computer, or other device. Recording will start

and stop automatically.

NOTES

• Please note that the Clavinova’s internal styles cannot be played

during multi-timbre recording.

• Any notes played on the keyboard and other setting changes will

be recorded on track 1 during multi-timbre recording.

• Initial panel settings will not be recorded unless the settings are

changed in the record ready mode.

• Previous data on all tracks will be erased when new data is

recorded in the multi-timbre mode.

• Be sure to turn the multi-timbre and external clock modes off

when you’re finished multi-timbre recording (see pages 49 and

50).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-83S Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-83S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info