Bedienungsanleitung Yamaha DGX-505 (Seite 75 von 112) (Englisch)

599411

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Using SmartMedia™ Memory Reference

DGX-505/305 Owner’s Manual 75

Three types of data are saved to one “User Data File” by this operation: user song, style ﬁle (style number 136), and

registration memory data. When you save a user song the style ﬁle and registration memory are also saved automati-

cally.

1 Make sure that a properly formatted Smart-

Media card has been properly inserted into

the instrument’s card slot, and that the ﬁle

control icon is showing in the MAIN display.

If the icon is not showing change the Media

Select setting to SmartMedia.

2 Press the [FILE CONTROL] button.

3 Use the CATEGORY [ ] and [ ] buttons to

locate the User File Save item.

A default ﬁle name will automatically be created.

4 Press the [EXECUTE] button. A cursor will

appear below the ﬁrst character in the ﬁle

name.

5 Change the ﬁle name as necessary.

• The [-] button moves the cursor to the left, and the

[0] button moves it to the right.

• Use the dial to select a character for the current

cursor location.

• The [+] button deletes the character at the cursor

location.

6 Press the [EXECUTE] button. The display

prompts you for conﬁrmation.

You can cancel the save operation at this point by

pressing the [-] button.

7 Press the [EXECUTE] button again, or the

[+] button, and the save operation will begin.

8 A message will appear on the display to

inform you that the operation has ﬁnished.

Press the [EXIT] button to return to the MAIN dis-

play.

Saving Data

● To Overwrite an Existing File

If you want to overwrite a ﬁle that already exists on

the SmartMedia card, use the dial or the [+] and [-]

buttons to select the ﬁle, then skip ahead to step 6.

• Up to 100 user ﬁles can be saved to a single SmartMedia card.

• If the SmartMedia card has been write-protected, an appropriate

message will appear on the display and you will not be able to exe-

cute the operation.

• If there is not enough capacity left on the card to save the data an

appropriate message will appear on the display and you will not be

able to save the data. Erase unwanted ﬁles from the card to make

more memory available (page 77), or use a different card.

• Refer to the “Messages” list on page 91 for other possible errors that

might prevent you from completing the operation.

NOTE

Cursor

Cursor right

Delete

character

Cursor left

The dial

selects

characters

• Once the save-in-progress message appears on the display the

operation cannot be canceled. Never turn off the power or

remove the SmartMedia card during this operation.

CAUTION

• If an existing ﬁlename is speciﬁed the display prompts you for conﬁr-

mation. Press [EXECUTE] or [+] if it is OK to overwrite the ﬁle, or [-]

to cancel.

• The amount of time it will take to perform the save operation will

depend on the condition of the SmartMedia card.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DGX-505 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DGX-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info