Bedienungsanleitung Yamaha DGX-505 (Seite 76 von 112) (Englisch)

599411

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Reference Using SmartMedia™ Memory

76 DGX-505/305 Owner’s Manual

This operation converts a user song (song numbers 031 – 035) to SMF Format 0 and saves the ﬁle to SmartMedia.

1 Make sure that a properly formatted Smart-

Media card has been properly inserted into

the instrument’s card slot, and that the ﬁle

control icon is showing in the MAIN display.

If the icon is not showing change the Media

Select setting to SmartMedia.

2 Press the [FILE CONTROL] button.

3 Use the CATEGORY [ ] and [ ] buttons to

locate the SMF Save item.

The SOURCE FILE – a user song name – will be

highlighted.

4 Select the source user song.

You can press the [+] and [-] buttons simultaneously

to select the ﬁrst user song.

5 Press the [EXECUTE] button.

The DESTINATION SONG will be highlighted, and

a default name will appear for the converted song ﬁle.

6 Press the [EXECUTE] button.

A cursor will appear below the ﬁrst character in the

ﬁle name.

7 Change the ﬁle name as necessary.

Refer to “Saving Data” on page 75 for ﬁlename entry.

8 Press the [EXECUTE] button. The display

prompts you for conﬁrmation.

You can cancel the save operation at this point by

pressing the [-] button.

9 Press the [EXECUTE] button again, or the

[+] button, and the save operation will begin.

10 A message will appear on the display to

inform you that the operation has ﬁnished.

Press the [EXIT] button to return to the MAIN dis-

play.

Convert a User Song to SMF Format and Save

● What is SMF (Standard MIDI File)?

The SMF (Standard MIDI File) format is one of the

most common and widely compatible sequence formats

used for storing sequence data. There are two variations:

Format 0 and Format 1. A large number of MIDI devices

are compatible with SMF Format 0, and most commer-

cially available MIDI sequence data is provided in SMF

Format 0.

• Up to 894 songs can be saved to a single SmartMedia card.

• This operation cannot be executed if there is no data in any of the

instrument’s user songs (song numbers 031 – 035).

NOTE

The source user song name.

● To Overwrite an Existing File

If you want to overwrite a ﬁle that already exists on

the SmartMedia card, use the dial or the [+] and [-]

buttons to select the ﬁle, then skip ahead to step 8.

The name of the ﬁle to be

saved

Cursor

• Once the save-in-progress message appears on the display the

operation cannot be canceled. Never turn off the power or

remove the SmartMedia card during this operation.

CAUTION

• If an existing ﬁlename is speciﬁed the display prompts you for conﬁr-

mation. Press [EXECUTE] or [+] if it is OK to overwrite the ﬁle, or [-]

to cancel.

• The amount of time it will take to perform the save operation will

depend on the condition of the SmartMedia card.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DGX-505 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DGX-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info