Bedienungsanleitung Yamaha DSP-Z11 (Seite 119 von 150) (Englisch)

464180

119

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

Advanced setup

119 En

Advanced

Operation

This unit has additional menus that are displayed in the front panel display.

The advanced setup menu offers additional operations to adjust and

customize the way this unit operates. Change the initial settings (indicated in

bold under each parameter) to reflect the needs of your listening

environment.

• The settings you make are reflected next time you press

MASTER ON/OFF

inward to the ON position to turn on this unit (see page 39).

• Only

MASTER ON/OFF and

PROGRAM are effective while you are using

the advanced setup menu.

• All the other operations cannot be made while you are using the advanced setup

menu.

• The advanced setup menu is only available in the front panel display.

1 Press

MASTER ON/OFF on the front panel to

release it outward to the OFF position to turn off this

unit.

2 Press and hold

PROGRAM and then press

MASTER ON/OFF inward to the ON position to

turn on this unit.

Press and hold

PROGRAM until “ADVANCED SETUP” appears

in the front panel display.

3 Rotate the

PROGRAM to select the parameter you

want to adjust.

The name of the selected parameter appears in the front panel display.

4 Push

PROGRAM repeatedly to change the

selected parameter setting.

5 Press

MASTER ON/OFF to release it outward to

the OFF position to save the new setting and turn off

this unit.

The settings you made are reflected next time you turn on this unit.

■ Speaker impedance SPEAKER IMP.

Use this feature to set the speaker impedance of this unit so that it matches

that of your speakers.

■ Remote sensor REMOTE SENSOR

Use this feature to activate or deactivate the signal-receiving capability of

the remote control sensor on the front panel of this unit.

We recommend setting the parameter to “ON” in most cases.

■ Wake on RS-232C access RS-232C STANDBY

Use this feature to set this unit to transmit data via the RS-232C interface

when this unit is in the standby mode.

■ Network standby NET STANDBY

Use this feature to select whether this unit accepts the commands via LAN

network when this unit is in the standby mode (see page 101).

If you set “NET STANDBY” to “YES”, the amount of power consumption in the

standby mode is increased.

■ Remote control ID setting REMOTE CON AMP

Use this feature to set the remote control ID of this unit for remote control

recognition.

Setting remote control ID

Use this feature to set the remote control ID. This feature is useful when you

control multiple Yamaha AV receiver or amplifier with using the remote

control.

Press GID repeatedly using a ballpoint pen or similar

object on the remote control to select the desired remote

control ID.

Each time you press GID, the remote control ID indicator changes as shown

below.

To set the remote control ID of the simplified remote control, see page 110 for details.

Advanced setup

Notes

Using the advanced setup menu

Choice Descriptions

8ΩMIN

Select this setting to set the speaker impedance to 8 Ω.

The impedance of each speaker must be 8 Ω or higher.

6ΩMIN

Select this setting to set the speaker impedance to 6 Ω.

The impedance of each speaker must be 6 Ω or higher.

Choice Descriptions

Select this setting if you want to activate the signal-

receiving capability of the remote control sensor.

OFF

Select this setting if you want to deactivate the signal-

receiving capability of the remote control sensor.

Note

Choice Functions

YES

Select this setting to set this unit to transmit data via the

RS-232C interface.

Select this setting to set this unit not to transmit data via

the RS-232C interface.

Choice Functions

YES

Accepts the operations via LAN network when this unit

is in the standby mode.

Does not accept the operations via LAN network when

this unit is in the standby mode.

Note

Choice Descriptions

ID1

Select this setting when the ID of the remote control is set

to “ID1”.

ID2

Select this setting when the ID of the remote control is set

to “ID2”.

ID1

ID2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DSP-Z11 Seite 119

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DSP-Z11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info