Bedienungsanleitung Yamaha DVDS1200 (Seite 28 von 32) (Englisch)

30887

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Advanced operations

Digital output

Refer also to “Common procedures” (á page 23) and the Audio menu

in “Summary of settings” (á page 24).

PCM Down Conversion

[DVD-A] [DVD-V]

Select how to output the high-quality audio signals (sampling fre-

quencies of 96 kHz and 88.2 kHz) on discs that do not have copyright

protection. Choose the settings to suit the equipment you have con-

nected.

¤1

The equipment cannot output signals of 88.2 kHz or more if the

setting is “No” and the equipment is unable to handle these signals.

Note

Signals are down-sampled to either 48 kHz or 44.1 kHz despite the

above settings if they have a sampling frequency of 176.4 kHz or

more or are copyright protected.

Dolby Digital

[DVD-A] [DVD-V]

Bitstream (Factory preset):

When you have connected a unit with a built-in Dolby Digital decoder.

PCM:

When you have connected a unit that doesn’t have a built-in Dolby

Digital decoder.

¤2

DTS Digital Surround

[DVD-A] [DVD-V]

PCM (Factory preset):

When you have connected a unit that doesn’t have a built-in DTS

decoder.

¤2

Bitstream:

When you have connected a unit with a built-in DTS decoder.

MPEG

[DVD-A] [DVD-V]

PCM (Factory preset):

When you have connected a unit that doesn’t have a built-in MPEG

decoder.

¤2

Bitstream:

When you have connected a unit with a built-in MPEG decoder.

¤2

These changes to digital audio output must be made, other-

wise bitstream signals the decoder cannot handle will be out-

put. If these signals are output, “noise” will be output which

can cause harm to your ears and speakers.

Entering a password

[DVD-V]

Refer also to “Common procedures” (á page 23) and the Disc menu

in “Summary of settings” (á page 24).

When setting ratings (When the level is 8)

The password screen is shown when you select levels 0 to 7.

1. Input a 4-digit password with the numeric buttons and press

[ENTER].

³If you enter a wrong number, press [CANCEL] to erase it before

you press [ENTER].

The lock symbol appears closed to show the rating is locked.

Do not forget your password.

2. Press [ENTER] to confirm the 4 digits.

When changing ratings (When the level is 0 to 7)

The password screen is shown when you select “Ratings”.

1. Input your 4-digit password with the numeric buttons and press

[ENTER].

2. Select the item with the cursor buttons [3,4] and press

[ENTER], and follow the on screen instructions.

Now, when you insert a DVD-Video that exceeds the ratings

limit you set, a message appears on the television.

Follow the on-screen instructions.

SETUP

RETURNENTER

Enter a 4-digit password,

then press ENTER.

Ratings

✱✱✱✱

Password

SELECT

SETUP

Ratings

Unlock Player

Change Password

Change Level

Temporary Unlock

RETURNENTER

SELECT

Changing settings

Setting

¤1

Yes

Equipment

(Able to handle

88.2 kHz or more)

Yes

Audio output

Output as is

Down-sampled to

48 kHz or 44.1 kHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha DVDS1200 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DVDS1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info