Bedienungsanleitung Yamaha DVDS1200 (Seite 29 von 32) (Englisch)

30887

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Reference

Do not use irregularly shaped discs, such as heart-shaped.

(These can damage the unit.)

º How to hold a disc

Do not touch the recorded surface.

P: Predictive coded picture (P-picture)

This picture is calculated based on past I or P-pictures.

B: Bidirectionally-predictive coded picture (B-picture)

This picture is calculated by comparing past and future I and P-

pictures so it has the lowest volume of information.

Linear PCM (pulse code modulation)

PCM is the usual digital method used for music CDs. DVDs have a

greater volume so they use linear PCM, which has a higher sampling

rate. Compressed PCM signals are called packed PCM (PPCM).

Optical digital audio cable

Electronic signals are converted to optical signals for output to the

amplifier. This reduces noise caused by electronic interference.

Pan&Scan/Letterbox

In general, DVD-Video are produced with the intention that they be

viewed on a widescreen television with an aspect ratio of 16:9. This

means you can view most material with the intended aspect ratio on a

widescreen television.

Material with this ratio will not fit onto a standard television with an

aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and “Letter-

box”, deal with this problem.

Pan&Scan: the sides are cut off so the picture fills the screen.

Letterbox: black bands appear at the top and bottom of the

picture so the picture itself appears in an aspect ratio

of 16:9.

Playback control (PBC)

If a Video CD has “playback control” written on it or its jacket, it

means that particular scenes or information can be selected for view-

ing interactively with the television using the menu screen. This unit

can play Video CDs with playback control.

Using menus to control play of a Video CD is called “menu play” in

these operating instructions.

Sampling rate

This is the number of samples of sound taken per second during con-

version to a digital signal. Sampling frequency is expressed in kilo-

hertz (kHz). A high sampling frequency results in a sound close to the

original when played back.

Title/Chapter

DVD-Video are divided up into large sections, titles, and smaller sec-

tions, chapters. The numbers allocated to these sections are called

title numbers and chapter numbers.

Track

This is the smallest division on DVD-Audio, CD, and Video CD, and

usually equates to a single song.

Bitstream

This is the digital form of multiple channel audio data (e.g., 5.1 chan-

nel) before it is decoded into its various channels.

Decoder

A decoder restores the coded signals on DVDs to normal. This is

called decoding.

Dolby Digital

This is a method of coding digital signals developed by Dolby Labora-

tories. Apart from stereo (2-channel) audio, these signals can also be

5.1-channel audio. A large amount of audio information can be re-

corded on one disc using this method.

Dolby Pro Logic

A surround system where a 4-channel audio track is recorded as

2 channels and then is restored to 4 channels for play. The surround

channel is monaural and can reproduce up to 7 kHz.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the

world. There is good separation between the channels, so realistic

sound effects are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound

that can be heard above the noise of the equipment and the highest

level of sound before distortion occurs.

Frame still and field still

A still is shown when you pause a moving picture. A frame still is

made up of two alternating fields, so the picture may appear blurred,

but overall quality is high.

A field still is not blurred, but it has only half the information of a frame

still so picture quality is lower.

Frames are the still pictures that go together to make a moving pic-

ture. There are about 30 frames shown each second.

One frame is made up of two fields. A regular television shows these

fields one after the other to create frames.

I/P/B

MPEG, the video compression standard adopted for use with DVD-

Video, codes frames using these 3 picture types.

I: Intra coded picture (I-picture)

This is the standard picture and is a complete picture in itself.

This means it has the best picture quality and is the best to use

when adjusting the picture.

Glossary

Disc handling

º If the disc is brought from a cold to a warm

environment, moisture may form on the disc

Wipe with a soft, dry, lint-free cloth before using the disc.

º Handling precautions

³Do not write on the label side with a ball-point pen or other writing

instrument.

³Do not use record cleaning sprays, benzine, thinner, static electric-

ity prevention liquids or any other solvent.

³Do not attach labels or stickers to discs. (Do not use discs with ex-

posed adhesive from tape or left over peeled-off stickers.)

³Do not use scratch-proof protectors or covers.

³Do not use discs printed with label printers available on the market.

º Do not place or store discs in the following

places

³Locations exposed to direct sunlight

³Humid or dusty locations

³Locations directly exposed to a heat vent or heating appliance

º If the surface is dirty

Wipe it with a damp cloth and then wipe dry.

Do not wipe with a circular motion; wipe straight outward from the

center.

Yamaha DVDS1200 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha DVDS1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info