Bedienungsanleitung Yamaha ES7 (Seite 73 von 300) (Englisch)

48742

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Playing the Keyboard (in the Performance Play mode)

Owner’s Manual

Quick Guide — Playing the MOTIF ES

For details about each parameter, refer to page 214 in the

Reference section.

Connecting audio equipment to the A/D

INPUT jack

The explanation below applies in particular to high-level audio

equipment, such as CD players, synthesizers, and other

keyboards.

Move the cursor to the “Mic/Line” parameter by using the

Cursor button and set it to “line” by using the [INC/YES]

button, [DEC/NO] button, or data dial.

nWhen the output level of the connected equipment (such as a

microphone, guitar, bass) is low, set this parameter to “mic.” When the

output level of the connected equipment (such as a synthesizer

keyboard, CD player) is high, set this parameter to “line.”

nThis setting is available for all modes. If you wish to store this setting,

press the [STORE] button.

For details about each parameter, refer to

page 214

in the

Reference section. When an optional AIEB2 or mLAN16E has

been installed, press the [SF5] button to call up the A/D display.

nAudio input signals from the OPTICAL INPUT and DIGITAL INPUT

connector (when the optional AIEB2 has been installed) or the mLAN

connector (when the optional mLAN16E has been installed) can also

be handled as Audio Input Parts. For details, see page 165.

7Adjust the microphone input level by using the

GAIN knob on the rear panel.

Set the audio input related parameters as

necessary from the AUDIO IN display ([PERFORM]

→→

→→ [EDIT] →→

→→ [COMMON] →→

→→ [F5] AUDIO IN).

9Store the settings as a User Performance in the

Performance Store mode (page 91).

1Make sure to turn off the power of both the

MOTIF ES and the relevant audio equipment.

2Plug the audio equipment cable to the A/D INPUT

jack on the rear panel.

3Switch the power of the connected audio

equipment on, then switch the power of the

MOTIF ES on.

A/D INPUT

LR GAIN

When the optional AIEB2 or mLAN16E has been installed,

the [F5] AUDIO IN menu has two indications: “A/D” and

“AIEB2” or “mLAN16E.” Here, call up the A/D display by

pressing the [SF5] button.

A/D INPUT

GAIN

4Press the [PERFORM] button to enter the

Performance Play mode and select the desired

Performance.

5Press the [UTILITY] button to enter the Utility

mode, press the [F2] I/O button, then press the

[SF1] INPUT button.

6Set Mic/Line to “line.”

7Adjust the audio input level by using the GAIN

knob on the rear panel.

Set the audio input related parameters as

necessary from the AUDIO IN display

([PERFORM] →→

→→ [EDIT] →→

→→ [COMMON] →→

→→ [F5]

AUDIO IN).

9Store the settings as a User Performance in the

Performance Store mode (page 91).

A/D INPUT

GAIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ES7 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info