Bedienungsanleitung Yamaha ES8 (Seite 257 von 300) (Englisch)

48744

257

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Sampling Mode

Sampling Job mode

257

Owner’s Manual

04: Move This Job lets you move a sample contained in a

speciﬁed Key Bank to another Key Bank. This would be

useful for creating a new Waveform from the samples of

various other existing Waveforms.

After specifying the source Waveform and Key Bank as

well as the destination Waveform and Key Bank, press

the [ENTER] button to execute the Move Job.

nIf the last remaining sample is moved from the source

Waveform, the source Waveform itself is deleted.

05: Normalize This Job maximizes (normalizes) the overall level of the

speciﬁed sample. The “100” (100%) setting is a quick

and convenient way to boost the level of an entire

sample, to make it as loud as possible without distorting.

After specifying the Waveform and Key Bank, then press

the [ENTER] button to execute the Normalize Job.

Ratio Speciﬁes the post-normalization sample level. A setting of 100% maximizes the level so that the highest peak level in

the sample is just below clipping (maximum digital signal level). Settings below 100% reduce the level of the sample

accordingly. Settings higher than 100% will raise the sample level above the maximum, producing deliberate

clipping.

Settings: 001 ~ 800%

06: Time-Stretch This Job lets you change the length of the sample without changing the pitch.

The basic steps in using this Job are the same as in 05: Normalize explained above.

Ratio Determines the length of post-process sample as a ratio of the length of the original sample (100%). Lower values

compress the sample, while higher values expand the sample.

Settings: 0~400%

Accuracy Determines the quality of the resulting sample by specifying which aspect of the original is to be emphasized: sound

quality or rhythmic feel.

Settings: sound4 - sound1, normal, rhythm1 - rhythm 2

sound4 - sound1 .............. These settings place emphasis on sound quality, with the “SOUND 4” setting producing the highest sound

quality.

normal .............................. Produces an optimum balance of sound quality and rhythmic feel.

rhythm1 - rhythm 2 ........... These settings place emphasis on rhythmic feel, with the “Rhythm 2” setting producing the most accurate

rhythmic feel.

07: Convert Pitch This Job lets you change the pitch of the sample without changing the length.

The basic steps in using this Job are the same as in 05: Normalize explained above.

Pitch Determines the amount and direction of pitch shift in semitone increments.

Settings: -12 ~ 0 ~+12

Fine Determines the amount and direction of ﬁne pitch shift in cent increments (1 cent = 1/100th of a semitone).

Settings: -50 ~ 0 ~ +50

08: Fade In/Out This Job lets you create fade-ins and fade-outs for the sample.

The basic steps in using this Job are the same as in 05: Normalize explained above.

Type Determines the type of level fade: fade-in or fade-out.

Settings: in (fade-in), out (fade-out)

Source Waveform and Key Bank

Destination Waveform and Key Bank

Set the Waveform and Key Bank containing

the sample to be normalized.

Press the [ENTER] button to execute the job.

Press the [F5] (CANCEL) button

to cancel the operation.

Press the [F6] (OK) button to assign the

normalized sample to the speciﬁed Key Bank.

Press the [ENTER] button to execute the operation.

If you are not satisﬁed with the results, change the Ratio

value and press the [ENTER] button again. This

automatically reverts back to the original settings and

executes the operation again with the new settings.

Source Wave

Ratio = less than 100%

Ratio = 100%

Ratio = more than 100%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ES8 Seite 257

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ES8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info