Bedienungsanleitung Yamaha ES8 (Seite 258 von 300) (Englisch)

48744

258

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Sampling Mode

Sampling Job mode

258 Owner’s Manual

Length Determines the length of the fade-in or fade-out.

When a fade-in is selected, this parameter

speciﬁes the length of the fade starting at the

speciﬁed Start point.

When a fade-out is selected, this parameter

speciﬁes the length of the fade starting at the

beginning of the fade and ending at the

speciﬁed End point.

Settings: 0000000 ~ End point

09: Convert Freq

(Convert Frequency)

This Job lets you halve the sampling frequency of the speciﬁed sample. This can be used to convert hi-ﬁ samples to

a lo-ﬁ sound, and reduce the sample size by half to conserve memory.

The basic steps in using this Job are the same as in 05: Normalize explained above.

10: Stereo to Mono This Job lets you convert a stereo sample to a mono sample.

The basic steps in using this Job are the same as in 05: Normalize explained above.

Type Determines which channel, or both channels, of the stereo sample will be converted to a mono sample.

Settings: L+R>mono, L>mono, R>mono

L+R>mono.......The left and right channels of the stereo sample are mixed and converted to a mono sample.

L>mono............The left channel of the stereo sample is converted to a mono sample.

R>mono ...........The right channel of the stereo sample is converted to a mono sample.

11: Loop-Remix This Job lets you automatically cut the sample into separate “slices” and randomly rearrange the slices for special

effects and unusual rhythmic variations. A variety of audio transform operations are also included for even greater

changes in the sound.

The basic steps in using this Job are the same as in 05: Normalize explained above.

Type Determines the degree to which the looped portion of the sample will be sliced.

Settings: 1~4

Variation Determines how the original sample is varied by the this Job.

Settings: normal1~2, reverse1~2

normal1~2........These settings slice and rearrange the sample data, without performing any other audio changes.

reverse1~2.......In addition to slicing and rearranging, these settings reverse the playback of some of the slices.

12: Slice This Job lets you divide the sample into separate “slices,” the number of which is determined by the note length

(with Measure, Meter, and SubDivide).

When entering this Job from the Song/Pattern mode, note data for playing the slices in sequence is also created.

(Keep in mind that the results of this Job vary depending on the previously selected mode: Voice/Performance or

Song/Pattern.)

The basic steps in using this Job are the same as in 05: Normalize explained above.

With the exception of the parameter below, all parameters and settings are the same as in the Slice display of the

Sampling Record mode (page 254).

Lowest Key Speciﬁes the lowest key number from which the sliced samples are assigned in order.

Settings: C - 2 ~ G8

nIn the Slice display of the Sampling Record mode (page 254), this parameter is ﬁxed to “C-1” for the MOTIF ES6, “E0” for the

MOTIF ES7, and “A-1” for the MOTIF ES8, and cannot be set.

[F2] WAVEFORM (Waveform Job)

01: Copy This Job lets you copy the data of one Waveform to

another.

After specifying the source Waveform and destination

Waveform, press the [ENTER] button to execute the

Copy Job.

02: Delete This Job lets you delete a speciﬁc Waveform from memory.

03: Transpose This Job lets you transpose the Key bank setting of a speciﬁed Waveform.

Octave Determines the amount in octaves by which the Key Bank is transposed. When you want to transpose by less than

one octave, set this to “0” and use the Note parameter below.

Settings: -3~ 0 ~+3

Note Determines the amount in semitones by which the Key Bank is transposed. When you want to transpose by exact

octaves, set this to “0” and use the Octave parameter above.

Settings: -11~ 0 ~+11

Length

Start point

Fade In

Length Start point

Fade Out

Source Waveform

Destination Waveform

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ES8 Seite 258

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ES8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info