Bedienungsanleitung Yamaha EX5 (Seite 177 von 304) (Englisch)

48736

177

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

177

Sample Mode

7 Check the input level of the microphone or audio

device with the input level bar(s).

For setting the destination sample bank/number, (even

when FLS is selected for the sample bank in the Sample

Play mode) an empty DRAM sample number is

automatically selected. Therefore it is not necessary to

select a sample number.

8 Press [F8] (STANDBY) to engage sampling standby

status, and “Waiting...” will be displayed in the

screen.

9 Start sampling using the trigger method specified in

step

5 above.

When “manual” is selected:

Press [F8] (START) to begin sampling.

When “level” is selected:

When the input signal from a microphone, for example,

passes the set value (trigger level), sampling automatically

begins.

When sampling is underway, “Now Recording...” is

displayed.

) Press [F8] (STOP) to stop sampling. The sampled

bank/number will be displayed.

If the set length of the sample is reached before you

press [F8] (STOP), sampling will automatically stop.

! Press [EXIT] to return to the Sample Play mode and

you can audition the newly recorded sample.

@ To execute another sampling, repeat the above steps

1~!.

When the power is turned off, the data in the internal

memory is erased. Remember to save important sample

data to floppy disk or an external storage device (page

259).

You can edit the sampled data using the sample edit

function in the Sample Edit mode and the copy function

in the Sample Job mode. Also, in the Voice Edit mode

(page 76) you can use the sampled data as an

element/wave in creating your original voice.

Furthermore, you can assign the sampled data to each

key (keymap function on page 72) and play them on the

keyboard.

■ Trigger Level

When “level” is selected as the trigger method, this

parameter will be displayed. This parameter sets the

trigger level at which sampling begins. When the

input signal through A/D INPUT jack(s) passes the

set value (trigger level), sampling automatically

begins. When setting the trigger level, you can see

the value level move in the level bar as you adjust

the level. In this way you can compare the starting

trigger value with the input level bar, to confirm the

level at which sampling will begin.

❏ Settings: 0~127

■ Length

This parameter displays the available sampling time

(recording time). The time is displayed both in

seconds and words. The value set here determines

the length (amount of time) that the sample is

recorded.

❏ Settings: The length will differ depending on the amount

of DRAM and FLASH memory capacity. When

shipped from the factory, the EX5/5R/7 contains

1MB of DRAM and this provides for about 12

seconds of monaural recording.

Steps for Sampling 1

(Sampling from an external device such

as a microphone)

First connect the microphone or audio device that you

will use in sampling to the A/D INPUT jack(s) (page

14).

1 When in the Sample Play mode, press [F8] (REC) to

enter the Sample Record mode.

2 Set desired record mode and select “A/D” for the

Source.

3 Set the parameter to the right of Source to “Mic” or

“Line” depending on the type of the input signal

level. When a microphone is connected, select Mic

(Mic Level). When an audio device such as a CD

player is connected, select Line (Line Level).

4 Adjust the input gain with the [A/D GAIN] knob on

the front panel.

5 Set the trigger method in the Trigger parameter.

When “level” is selected, continue by setting the

trigger level.

6 Confirm the available sampling time (recording time)

in the Length parameter. (If necessary,) set the

length of the sampling.

Sample/E/qx 5/21/98 11:39 AM Page 177

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 177

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info