Bedienungsanleitung Yamaha EX5 (Seite 185 von 304) (Englisch)

48736

185

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

185

Song Mode

■ Remaining Memory

This bar graph indicates the amount of memory

available for recording, or the remaining memory of

the internal sequencer. This is common for all the

internal sequencer functions, Song, Pattern and

Arpeggio.

■ Measure/SONG (Song Name)

The song name and the current measure number

will be displayed. These items cannot be modified.

Track Section

These settings are used to set the Mute and Play Effects

Thru to “on” or “off” for each track even during song

playback.

■ Track Number

One song consists of 1~16 sequence tracks, Pt

(Pattern) tracks, and Fx (Pattern Play Effects) tracks.

The Track Number is highlighted (box colored

black) for tracks that have been recorded on and

contain data.

■ Mute

Sets Mute for a track, by moving the cursor to the

Mute line, and using Data Dial or [INC]/[DEC] to

select “on” or “off.” As shown in the diagram, the

box colored black indicates that Mute is turned “on.”

When Mute is turned “on,” that track is muted

during playback, and the sound is temporarily

suspended. When Mute is turned “off,” only the

outline of the box will be displayed, Mute is

canceled, and sound will once again be produced.

■ Play Effects Thru

Sets FxThru (Play Effects Thru) for a track, by

moving the cursor to the FX Thru line, and using

Data Dial or [INC]/[DEC] to select “on” or “off.” As

shown in the diagram, the box colored black

indicates that FxThru is turned “on.” When FxThru

is turned “on” for a track, Play Effects are

temporarily by-passed during playback. When

FxThru is turned “off,” only the outline of the box

will be displayed, the FxThru function is canceled,

and Play Effect settings become effective once again.

The Play Effects Thru function is not available for the

Pattern Play Effects tracks.

Song Play Mode

This mode uses the internal sequencer to play songs

and has various functions related to song playback. You

can enter the Record mode from the Song Play mode

and record a song. The songs you have recorded can be

stored to floppy disk so that you can make use of them

whenever you like.

For more information about the sequencer, see page 60.

Press [SONG] key on the panel to enter Song Play

mode. When you enter the Song Play mode, the

following menu screen will appear. In the Song Play

mode, there are four types of menus.

[F1]: SONG (Settings related to song playback)

[F2]: PFX (Settings related to Play Effects)

[F3]: TCH (Settings related to the track transmit

channels)

[F4]: NAME (Settings related to naming songs)

[F1]: SONG

These parameters are used to set the Mute and Play

Effects Thru functions for each song track (1~16

tracks, Pt track, Fx track). They can be set to “on” or

“off.” There are also settings related to song playback,

such as Tempo and Loop.

Song NameMeasureRemaining Memory

F1 F2 F3 F4

Song/E/qx 5/21/98 11:40 AM Page 185

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 185

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info